博碩士論文 86426015 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:19 、訪客IP:3.133.13.204
姓名 李智信(Zhe-Shin Lee)  查詢紙本館藏   畢業系所 工業管理研究所
論文名稱 動態調整型多載量自動倉儲系統之控制
相關論文
★ 佈置變更專案工程的執行研究 -以H公司研發單位為例★ MIL-STD-1916、MIL-STD-105E與結合製程能力指標之抽樣檢驗計畫
★ 建構客戶導向的製造品質資訊系統--以某筆記型電腦專業代工廠商為例★ GMP藥廠設施佈置規劃的探討--以E公司為研究對象
★ 應用Fuzzy c-Means演算法之物流中心位址決策模式研究★ 品質資訊系統之規劃與建構 -- 以某光碟製造公司為研究對象
★ 從製程特性的觀點探討生產過程中SPC管制圖監控運用的適切性 -- 以Wafer Level 封裝公司為例★ 六標準差之應用個案研究-以光學薄膜包裝流程改善為例
★ 利用六標準差管理提昇中小企業之製程品質-以錦絲線添加防銹蠟改善為例★ 專業半導體測試廠MES 系統導入狀況、成果及問題之探討-以A 公司為例
★ 以RFID技術為基礎進行安全管理導入-以A公司為例★ 如何提昇產品品質及降低成本—以光碟壓片廠A公司為例
★ ERP導入專案個案分析—以半導體封裝廠A公司為例★ 石英元件製造業之延遲策略應用— 以T公司為研究對象
★ 十二吋晶圓廠自動化搬運系統規劃與導入—以A公司為例★ 半導體封裝產業之生產革新改善活動-A半導體股份有限公司導入經驗探討-
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載]
  1. 本電子論文使用權限為同意立即開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。

摘要(中) 用來評估倉儲系統的效能一般最常見的是物料平均存取時間,以往有關自動倉儲的研究,大多著重於單載量的設計,雖然單載量的AS/R系統具有控制簡單的優點,但由於存取機經常空車往返,所以物料平均存取時間常常無法有效降低。尤其在少量多樣的製造業裝配線上,一道取貨需求往往可能包含多項物料,而物料與物料之間也常存有某種程度的相關性,且此種相關性會隨著時間而有所變化。但是就傳統單載量AS/R系統的設計而言,即使已經存放於鄰近位置的物料,也必須來回存取多次,非常費時。
本研究為改善傳統單載量AS/R系統的缺點,故提出一套運用多載量存取機的新系統,此系統主要特徵有(1)存貨暫存區與捷徑之設置,以減少不必要的存取動作、(2)觀察遞增率並動態調整物料相關性以安排較佳之存貨位置,此外存取路徑的決定也考慮無成本區的觀念以求減少時間成本的浪費。
關鍵字(中) ★ 自動倉儲系統
★ 多載量
關鍵字(英) ★ AS/RS
★ AS/R
論文目次 目 錄Ⅰ
圖目錄Ⅲ
表目錄Ⅴ
第1章 緒論1
1.1 研究背景1
1.2 研究動機2
1.3 問題敘述3
1.3.1 AS/R系統硬體基本構造3
1.3.2 AS/R系統的運作過程3
1.3.3 環境假設6
1.4 研究步驟6
1.5 論文架構7
第2章 文獻探討9
2.1 硬體架構9
2.2 控制策略與方法11
2.2.1 單載量之控制策略11
2.2.2 多載量之控制策略18
第3章 研究方法與步驟20
3.1 動態調整型多載量自動倉儲系統介紹20
3.1.1 系統特徵20
3.1.2 基本假設21
3.2 無成本區22
3.2.1 存取機的移動特性22
3.2.2 無成本區的特性23
3.3 動態調整型多載量自動倉儲系統的控制策略25
3.3.1 觸發系統運作25
3.3.2 決定存取機的存取路徑28
3.3.3 系統執行存取動作34
3.3.4 實例說明35
第4章 模擬實驗與分析41
4.1 前言41
4.2 績效評估準則41
4.3 模擬實驗42
4.3.1 模擬實驗環境假設42
4.3.2 模擬因子與模擬設計43
4.4 模擬結果44
4.4.1 動態調整型參數之決定44
4.4.2 四種存取法則之比較47
第5章 結論與建議51
5.1 結論51
5.2 建議51
參考文獻52
附錄A系統模擬實驗結果57
附錄B 系統模擬畫面說明63
附錄C 原始程式碼71
參考文獻 一、中文文獻
江銓祥 「自動倉儲系統訂單撿選問題之分析」 碩士論文,清華大學,民國七十八年
鄭漢濱 「裝配業自動倉儲系統之儲位規劃」 碩士論文,中原大學,民國八十一年
楊和熹 「多載量自動倉儲系統之控制」 碩士論文,中央大學,民國八十六年
二、英文文獻
二、英文文獻
二、英文文獻
Bartholdi, John A. and Platzman, Loren K., 1986, "Retrieval Strategies for a carousel conveyor,” IIE Transactions, vol.18, no.2, pp.166 - 173
Berry, J. R., 1968, "Elements of warehouse layout,” The International Journal of Production, vol.7, no.2, pp.105 - 121
Bozer, Yavuz A. and White, John A., 1984, "Travel-time models for automated storage / retrieval systems,” IIE Transactions, vol.16, no.4, pp.329 - 338
Bozer, Yavuz A. and White, John A., 1996, "A generalized design and performance analysis model for end-of-aisle order-picking,” IIE Transactions, vol.28, no.4, pp.271 - 280
Chaime, M. Eben, 1992, "Operations sequencing in automated warehousing systems,” International Journal of Production Research, vol.30, no.10, pp.2401 - 2409
Chaime, M. Eben, 1992, "Operations sequencing in automated warehousing systems,” International Journal of Production Research, vol.30, no.10, pp.2401 - 2409
Chaime, M. Eben, 1992, "Operations sequencing in automated warehousing systems,” International Journal of Production Research, vol.30, no.10, pp.2401 - 2409
Elsayed, E. A., 1981, "Algorithms for optimal material handling in automatic warehousing systems,” International Journal of Production Research, vol.19, no.5, pp.525 - 535
Elsayed, E. A., 1981, "Algorithms for optimal material handling in automatic warehousing systems,” International Journal of Production Research, vol.19, no.5, pp.525 - 535
Elsayed, E. A., 1981, "Algorithms for optimal material handling in automatic warehousing systems,” International Journal of Production Research, vol.19, no.5, pp.525 - 535
Eom, Jae Kyun and Kim, Kyung Sup, 1997, "An expert system for selection of material handling and storage systems,” Intrational Journal of Industrial Engineering, vol.4, no.2, pp.81 - 89
Eynan, Amit and Rosenblatt, Meir J., 1993, "An interleaving policy in automated storage / retrieval systems,” International Journal of Production Research, vol.31, no.1, pp.1 - 18
Eynan, Amit and Rosenblatt, Meir J., 1994, "Establishing zones in sigle-command class-based rectangular AS/RS,” IIE Transactions, vol.26, no.1, pp.38 - 46
Foley, R. D. and Frazelle, E. H., 1991, "Analytical results for miniload throughput and the distribution of dual command travel,” IIE Transactions, vol.23, no.3, pp.273 - 281
Foley, R. D. and Frazelle, E. H., 1991, "Analytical results for miniload throughput and the distribution of dual command travel,” IIE Transactions, vol.23, no.3, pp.273 - 281
Francis, Richard L. and White, John A., 1971, "Normative models for some warehouse sizing problems,” AIIE Transactions Transactions, vol.3, no.3, pp.185 - 190
Graves, Stemphen C. and Hausman, Warren H. and Schwarz, Leroy B., 1977, "Storage-retrieval interleaving in automatic warehousing systems,” Management Science, vol.23, no.9, pp.935 - 945
Graves, Stemphen C. and Hausman, Warren H. and Schwarz, Leroy B., 1976, "Optimal storage assignment in automatic warehousing systems,” Management Science, vol.22, no.6, pp.629 - 638
Gross, J. George, 1981, "Picking methods may provide key to lower cost warehouse plans,” IE, vol.13, no.6, pp.50 - 54
Gross, J. George, 1981, "Picking methods may provide key to lower cost warehouse plans,” IE, vol.13, no.6, pp.50 - 54
Hsieh, S. and Hwang, J.-S. and Chou, H.-C., 1998, "A petri-net-based structure for AS/RS operation modelling" , International Journal of Production Research, vol.36, no.12, pp.3323-3346
Hsieh, S. and Hwang, J.-S. and Chou, H.-C., 1998, "A petri-net-based structure for AS/RS operation modelling" , International Journal of Production Research, vol.36, no.12, pp.3323-3346
Hwang, Hark and Kim, Chae-soo and Ko, Kyung-hee, 1999, "Performance analysis of carousel systems with double shuttle,” Computers & Industrial Engineering, Vol.36, Issue.2, pp.473 - 485
Jaikumar, Rmchandran and Solomon, Marius M., 1990, "Dynamic operational policies in an Automated Warehouse,” IIE Transactions, vol.22, no.4, pp.370 — 375
Jawahar, N. and Aravindan, P. and Ponnambalam, S. G., 1998, "Optimal random storage allocation for an AS/RS in an FMS,” Int. J. Adv. Manuf. Technol., vol.14, no.2, pp.116-132
Khan, M. Riaz, 1984, "An efficiency measurement model for a computerized warehousing system,” International Journal of Production Research, vol.22, no.3, pp.443 - 452
Khan, M. Riaz, 1984, "An efficiency measurement model for a computerized warehousing system,” International Journal of Production Research, vol.22, no.3, pp.443 - 452
Khan, M. Riaz, 1984, "An efficiency measurement model for a computerized warehousing system,” International Journal of Production Research, vol.22, no.3, pp.443 - 452
Lee, Moon-Kyu, 1992, "A storage assignment policy in a man-on-board automated storage / retrieval system,” International Journal of Production Research, vol.30, no.10, pp.2281 — 2292
Linn, Richard J. and Wysk, Richard A., 1987, "An analysis of control strategies for an automated storage / retrival system,” INFOR, vol.25, no.1, pp.66 - 83
Linn, Richard J. and Wysk, Richard A., 1987, "An analysis of control strategies for an automated storage / retrival system,” INFOR, vol.25, no.1, pp.66 - 83
Malmborg, C. J., 1996, "Storage assignment policy tradeoffs,” International Journal of Production Research, vol.34, no.2, pp.363 - 378
Malmborg, C. J., 1996, "Storage assignment policy tradeoffs,” International Journal of Production Research, vol.34, no.2, pp.363 - 378
Roberts, Stephen D. and Reed, Ruddell, 1972, "Optimal warehouse bay configurations,” AIIE Transactions, vol.4, no.3, pp.178 - 185
Roll, Yakov and Rosenblatt, Meir J., 1984, "Warehouse design with storage policy considerations,” International Journal of Production Research, vol.22, no.5, pp.809 - 821
Roll, Yakov and Rosenblatt, Meir J., 1984, "Warehouse design with storage policy considerations,” International Journal of Production Research, vol.22, no.5, pp.809 - 821
Roll, Yakov and Rosenblatt, Meir J., 1984, "Warehouse design with storage policy considerations,” International Journal of Production Research, vol.22, no.5, pp.809 - 821
Wilson, Hoyt G., 1977, "Order quantity, product popularity, and the location of stock in a warehouse,” AIIE Transactions, vol.9, no.3, pp.230 - 237
指導教授 何應欽(Ying-Chin Ho) 審核日期 2000-7-14
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明