博碩士論文 104426023 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:22 、訪客IP:3.22.61.73
姓名 郭育菁(Yu-Ching Kuo)  查詢紙本館藏   畢業系所 工業管理研究所
論文名稱 車用鉛蓄電池回收與再利用研究
(The study of automotive lead-acid battery recycling and reuse)
相關論文
★ 應用灰色理論於有機農產品之經營管理— 需求預測及關鍵成功因素探討★ NAND型Flash價格與交運量預測在風險分析下之決策模式
★ 工業電腦用無鉛晶片組最適存貨政策之研究-以A公司為例★ 砷化鎵代工廠磊晶之最適存貨管理-以W公司為例
★ 資訊分享&決策制定下產銷協同關係之研究 -以IC設計業為例★ 應用分析層級法於電子化學品業委外供應商評選準則之研究
★ 應用資料探勘於汽車售服零件庫存滯銷因素分析-以C公司為例★ 多目標規劃最佳六標準差水準: 以薄膜電晶體液晶顯示器C公司製造流程為例
★ 以資料探勘技術進行消費者返廠定期保養之實證研究★ 以價值鏈觀點探討品牌公司關鍵組織流程之取決-以S公司為例
★ 應用產銷協同規劃之流程改善於化纖產業-現況改善與效益分析★ 權力模式與合作關係對於報價策略之影響研究—以半導體產業A公司為例
★ 應用資料探勘於汽車製造業之庫存原因分析★ 以類神經網路預測代工費報價---以中小面板產業C公司為例
★ 電路板產業存貨改善研究-以N公司為例★ 運用六標準差改善機台備用零件(Spare parts)存貨管理
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載]
  1. 本電子論文使用權限為同意立即開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。

摘要(中) 汽車,為現今社會不可缺少的必需品,隨著經濟發展,全球汽車擁有量增長迅速,統計至2014 年,全球汽車總數超過12 億輛,依據國際能源組織(IEA)估計,到2035 年時,全球汽車數量將會達到17 億輛的龐大規模;而隨著汽車的生命週期結束,約75%的汽車重量,主要是金屬部分,可以被回收再利用,其餘約25%的重量通常被認為無利用價值廢棄物,直接填埋於垃圾場;而汽車中俗稱的電瓶也就是鉛蓄電池,倘若未將達到產品生命週期的汽車之廢鉛蓄電池做妥善處理,將會對環境造成影響,因此國際間訂定了許多關於廢棄汽車回收的規範及法規,而台灣環保署對廢棄汽車之廢鉛蓄電池列為應回收項目。

本研究提及的泰銘實業股份有限公司,為台灣唯一取得回收補貼的廢鉛蓄電池處理廠商;泰銘實業股份有限公司使用熱處理法處理廢鉛蓄電池,經由拆解處理後可分成三大產出物:鉛錠、塑膠及廢酸液,鉛錠及塑膠可以經處理後做為原料販售,但廢酸液卻只能經由廢水處理設備處理後排放,故本研究想針對廢酸液的處理方式進行探討,參考國外對於廢鉛蓄電池的處理方法,對於不同處理方法產生的酸液種類各有不同且可供出售,如此一來,兼顧環境面及經濟面的改善,達到環保以及回收再利用之目的。

本研究想透過投資新設備及新技術的方法去改善酸液品質並了解其濃度與其產出物之交互關係,之後欲建構一個考慮雜質、失重率、製程變動處理成本以及增加投資的酸液品質改善模型,主要是希望能夠過模型來增加酸液之濃度,來提高其價值,以及減少製程變動處理成本,且供決策者做最佳設備投資方案以及製程之選擇,並且極大化回收處理商之利潤,讓回收處理商增加處理廢酸液之意願,最後,本研究選擇精煉熱處理法最為廠商最佳投資方案選擇。
摘要(英) Automobile, essential to society, with the development of economy, the totalnumber of global automobiles grew up rapidly, in 2014 year, the total global number of automobiles more than 1.2 billion; according to estimates by IEA ,the total global number of automobiles are expected to reach 1.7 billion.However, throughout
automobiles’ life cycle end, about 75 percent of end-of -life automobiles, mainly metals, are recyclable, the 25 percent of the end-of -life automobiles are considered
waste and generally goes to landfills. And if do not properly handle the lead-acid battery of end-of-life automobiles, it would impact the environment in several ways, therefore, there are some laws about recycling of end-of-life automobiles ,In Taiwan, the lead-acid battery of end-of-life automobiles is the must be recycled item.

The scrap lead-acid battery can be divided by three parts after the disassemble process. One is lead, another is plastic and the other is acid liquid, lead and plastic can be sold as material after the process but the acid liquid just be discard after the process. So, we wants to reference the technology of acid liquid process on other country, choose the foreign technology process, make acid liquid becomes valuable and can be sold on the market.

We wants to build the acid liquid quality improvement model which consider the impurities of output and the weight loss rate and the cost of process variable, and
understand the intersection relationship between the output and the concentration by investing new technology process and new equipment. Our goal is maximum the profit of the manufacturer by providing the best selection of technology process to add the acid liquid value by impurities reduction and reduce the cost of process
variable, therefore, it would be an incentive to manufacturer to recycle and reuse the scrap acid liquid; finally, the refining heat treatment is the best selection in this thesis.
關鍵字(中) ★ 汽車
★ 廢鉛蓄電池
★ 投資決策
★ 品質改善
★ 回收
關鍵字(英) ★ automobile
★ scrap lead-acid battery
★ investment decision
★ quality improvement
★ recycling
論文目次 目錄
摘要 ……………………………………………………………………… i
Abstract ……………………………………………………………………… ii
目錄 ……………………………………………………………………… iii
圖目錄 ……………………………………………………………………… v
表目錄 ……………………………………………………………………… vii
第一章 緒論………………………………………………………………… 1
1-1 研究背景與動機……………………………………………… 1
1-2 研究目的……………………………………………………… 2
1-3 研究範圍……………………………………………………… 3
1-4 研究流程與架構……………………………………………… 3
第二章 文獻探討…………………………………………………………… 5
2-1 汽車電池的種類與應用……………………………………… 5
2-1-1 鋰離子電池……………………………………………… 5
2-1-2 鎳氫電池………………………………………………… 5
2-1-3 鉛蓄電池………………………………………………… 6
2-2 鉛蓄電池國際間回收處理方式及其產出物處理方式……… 7
2-2-1 國際廢鉛蓄電池回收現況……………………………… 7
2-2-2 國際廢鉛蓄電池回收處理方式………………………… 8
2-2-3 國際廢酸液種類處理方式及用途……………………… 10
2-3 台灣廢鉛蓄電池回收處理方式及產出物價值……………… 12
2-3-1 台灣現行相關規範及廢鉛蓄電池回收制度…………… 12
2-3-2 台灣廢鉛蓄電池回收現況及廢鉛蓄電池回收處
理廠商處理流程………………………………………
14
2-3-3 回收處理廢鉛蓄電池之產出物用途及價值…………… 18
2-4 相關之文獻探討……………………………………………… 20
2-4-1 汽車回收概況及相關法規……………………………… 20
2-4-2 品質改善及投資決策…………………………………… 23
第三章 研究方法…………………………………………………………… 25
3-1 泰銘實業股份有限公司簡介………………………………… 25
3-2 問題描述……………………………………………………… 28
3-3 研究方法……………………………………………………… 29
3-4 模型基本假設及符號定義…………………………………… 30
3-5 廠商利潤極大化模型建構…………………………………… 31
3-5-1 廠商總成本函數………………………………………… 31
3-5-2 廠商總收益函數………………………………………… 31
3-5-3 廠商投資後利潤極大化函數…………………………… 32
3-6 酸液品質改善以及製程變動成本減少之投資函數………… 33
第四章 敏感度分析………………………………………………………… 35
4-1 參數設定……………………………………………………… 35
4-1-1 預期目標………………………………………………… 38
4-1-2 情境假設………………………………………………… 39
4-2 數值分析……………………………………………………… 40
4-2-1 投資前廠商總成本、總收益…………………………… 40
4-2-2 各技術下預期目標之廠商總成本、總收益、投
資成本以及利潤………………………………………
40
4-2-3 情境假設下廠商之總成本、總收益、投資成本以
及利潤…………………………………………………
44
4-3 小結…………………………………………………………… 44
4-4 敏感度分析…………………………………………………… 45
4-4-1 比較各產出物之參數對總收益、總成本及總利潤
之影響…………………………………………………
46
第五章 結論與未來方向…………………………………………………… 54
5-1 結論…………………………………………………………… 54
5-2 未來研究方向………………………………………………… 55
參考文獻 參考資料與文獻
[1] Ballon, Massie Santos (2008). " Electrovaya, Tata Motors to make electric
Indica". cleantech.com. Archived from the original on 9 May 2011. Retrieved
11 June 2010.
[2] Gaines, L. (2014). "The future of automotive lithium-ion battery recycling:
Charting a sustainable course." Sustainable Materials and Technologies 1–2:
2-7.
[3] ITTNER, C. D. (1994). "An examination of the indirect productivity gains
from quality improvement. "Production and Operations Management, 3(3),
153-170.
[4] Jaiswal, A. (2017). "Lithium-ion battery based renewable energy solution for
off-grid electricity: A techno-economic analysis." Renewable and Sustainable
Energy Reviews 72: 922-934.
[5] Kafuku, J. M.. (2015). "Investment decision issues from remanufacturing
system perspective: literature review and further research." Procedia CIRP 26:
589-594.
[6] Kanari, N., J. Pineau and S. Shallari (2003). "End-of-life vehicle recycling in
the European Union." Jom 55(8): 15.
[7] Kono, H. (2012). "Safer zone analysis for multiple investment alternatives on
the total-cost unit-cost domain." Industrial Engineering and Management
Systems 11(1): 11-17.
[8] Li, W. (2016). "Life cycle assessment of end-of-life vehicle recycling
processes in China—take Corolla taxis for example." Journal of Cleaner
Production 117: 176-187.
[9] Porteus, E. L. (1985). "Investing in reduced setups in the EOQ model."
Management Science 31(8): 998-1010.
[10] Porteus, E. L. (1986). "Optimal lot sizing, process quality improvement and
setup cost reduction." Operations research 34(1): 137-144.
57
[11] Sarkar, B. and I. Moon (2014). "Improved quality, setup cost reduction, and
variable backorder costs in an imperfect production process." International
Journal of Production Economics 155: 204-213.
[12] Sigman, H. A. (1995). "A comparison of public policies for lead recycling. "
The RAND journal of Economics, 452-478.
[13] Soo, V. K.. (2016). "Is the Australian Automotive Recycling Industry Heading
towards a Global Circular Economy? – A Case Study on Vehicle Doors."
Procedia CIRP 48: 10-15.
[14] Tsoulfas, G. Tl. (2002). "An environmental analysis of the reverse supply chain
of SLI batteries." Resources, Conservation and Recycling 36(2): 135-154.
[15] Tsou, J. and J. Chen (2005). "Dynamic model for a defective production
system with Poka-Yoke." Journal of the operational research society 56(7):
799-803.
[16] Vest, H. (2002). "Fundamentals of the recycling of lead-acid batteries."
Infogate/Deutschen Gesellschaft für Technische Zusammenarbeit (GTZ)
GmbH 27: 2011.
[17] Statistic-portal, "Statistics and facts about motor vehicle production", 取自:
https://www.statista.com/topics/975/motor-vehicle-production/
[18] 王家祥(2015),"強化廢輪胎、廢鉛蓄電池回收處理及再利用體系運作暨碳
排放係數建置",行政院環境保護署
[19] 張添晉、樊國恕(2011) ,"廢輪胎、廢鉛蓄電池回收體系分級補貼 前置規劃
暨回收率計算檢討計畫",行政院環境保護署
[20] 曾明捷、蔡宗岳、陳孙揚(2012) ,"廢鉛蓄電池處理後廢酸液再利用方式暨
鉛蓄電池產品綠色設計趨勢調查計畫",行政院環保署
[21] 行政院環境保護署(2013) ,"廢鉛蓄電池廢酸液綠色處理技術新思維",行政
院環境保護署
[22] 行政院環境保護署基管會(2014) ,"創造資源回收產值-環保署魏國彥署長
參訪廢鉛蓄電池處理廠運作情形",行政院環境保護署
58
[23] 李芬菲(2016),"回收鉛蓄電池 循環經濟高價值",自立晚報
[24] 陳長裕(2009) ,"我國廢棄物處理管制現況及未來展望",行政院環保署廢棄
物管理處
[25] 洪士耕(2012),"有夠擠!IEA 國際能源組織預估2035 年全球汽車數量將達
17 億輛",汽車日報
[26] 泰銘實業股份有限公司,取自:http://www.tmicl.com.tw/index.html
[27] 理財網-泰銘實業股份有限公司,取自:
https://www.moneydj.com/KMDJ/Wiki/WikiViewer.aspx?keyid=8d45c239-fd
32-4b0e-9305-b2c279459783
指導教授 陳振明 審核日期 2017-6-28
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明