摘要(英) |
In response to the diversification and short life cycle of new technology products, the relationship with supply chain cooperation has evolved to “strategic supply management” mode. The advantages of strategic corporate competition depend on part of competition and management in supply chain, choosing the appropriate supplier is the most important part of supply chain management. The selection of the right suppliers will further enhance the
competitiveness and customer satisfaction of the products.
As the technologies in the semiconductor industry continue to improve, the requirements for process equipment systems become more and more complicated. In addition, the market demand continues to increase and expand. With the expansion of the market for semiconductor process equipment, the equipment vendors purchase amount of parts will also grow in Taiwan. In all wafer processing equipment, dry etching equipment used majority
consumption parts in chamber.
The consumable parts performance has a decisive influence, which in turn has a significant contribution to the process yield of the customer′s product. At present, to establish consumable parts supply chain is according to customer’s policy and demand in local. Therefore, the establishment of the consumable parts supplier and the selection result will inevitably affect the supply to the customer.
Supplier selection is a multi-criteria decision making problem (Multiple Criteria Decision Making), In this paper, we will study decision-making laboratory analysis DEMATEL (Decision Making Trial and Evaluation Laboratory) to discuss the correlation and causal relationship between the selected facets and the criteria for the supplier of semiconductor process equipment in Taiwan, Then use the ANP (Analytic Network Process)
to get the relative weight of every facet and criterion. |
參考文獻 |
中文部分
[1] 野尻一男/倪志榮,「半導體乾蝕刻技術」,初版,白象文化,台中,2015年4月。
[2] 張紹勳,「模糊多準則評估法及統計」,二版,五南圖書出版,台北,2016年6月。
[3] 鄧振源,「多準則決策分析-方法與應用」,一版,鼎茂圖書,台北,2010年10月。
[4] 張魁峯,「Super Decisions軟體操作手冊」,二版,鼎茂圖書,台北,2017年5月。
[5] 許振邦,「採購與供應管理」,三版,智勝文化,台北,2013年1月。
[6] 蔡雅寧,「結合AHP與DEMATEL探討供應商評選準則之優先次序與因果關係-
以汽車零配件產業為例」,國立彰化師範大學,碩士論文,2009年6月。
[7] 簡竣諒,「運用DEMATEL與ANP方法探討直升機飛安管理」,中華大學,碩士論
文,2011年7月。
[8] 莊千儀,「以DEMATEL與ANP探討半導體通路商最佳企業成長策略之決策分
析」,中華大學,碩士論文,2010年7月。
[9] 曾國雄,「結構模型在社會系統上之應用」,交通運輸雜誌,2,11-14頁,1980年。
[10] 游伯龍,「行為與決策:知己知彼的基礎與應用」,中央研究院經濟研究所,台北,
1985年。
[11] 王麗芬,「以DEMATEL及ANP分析醫院藥局主動式藥事服務模式要素研究」,
國立彰化師範大學,碩士論文,2012年6月。
[12] 林俊男,「運用決策實驗室分析法探討汽車電子產業外派人員之適應性」, 國立中
山大學,碩士論文,2014年6月。
[13] 曾勝賢,「運用DEMATEL方法於晶圓廠製程設備採購評估」,逢甲大學,碩士論
文,2011年6月。
[14] 甘能昊,「運用DEMATEL與Fuzzy ANP於新產品開發績效評估-以大陸台商
TET-LCD觸控面板產業為例」,中華大學,碩士論文,2013年8月。
[15] 山下大樹,「應用DEMATEL與ANP探討多國籍企業國外直接投資的決定因素:
以日本企業投資台灣為例」,國立高雄大學,碩士論文,2015年1月。
[16] 杜瑞澤、徐傳瑛,「分析網路程序法(ANP)運用於綠色產品開發之設計決策研究」,
高雄師大學報,24,57-79 ,2008年。
[17] 衛萬里,「應用分析網路程序法選擇最佳產品設計方案之決策分析模式」,國立臺
灣科技大學,博士論文,2007年6月。
[18] 吳怡芬,「應用網路層級分析法於研發聯盟夥伴評選之研究」,國立勤益科技大學,
碩士論文,2007年6月。
[19] 賴豐升,「應用ANP探討服務品質之構成要素-以資訊產品代理商為例」,國立勤
益科技大學,碩士論文,2009年6月。
[20] 劉政劭,「透過ANP評估製造業的服務系統設計的關鍵因子」,國立中央大學,碩
士論文,2012年6月。
英文部分
[21] Fontela,E. and A.Gabus.,The DEMATEL Obeserver,Switzerland Geneva:Batte
Memorial Institute Geneva Research Center,1976.
[22] Golding,E.I.,”Goals measurement system(GSM):A quantitative program
effectiveness”,Interface 3(1),1977.
[23] Hori,S.and Y.Shmizu.,”Designing Method of Human Interface for Supervisory Control
System”,Control Engineering Practice,1999.
[24] Hwang,C.L.and A.S.M.Masud.,Multiple Attribute Decision Making: Method and
Application,Spring-Verlag,New York,1979.
[25] Kyung, Chae Yang1,et al.,”Effect of Structure and Material Variation of Focus Ring
for Enhanced Etch Resistance”,Nanoscience and Nanotechnology Letters,Vol. 9, 24–
29,2017.
[26] Keeney,R.and H.Raiffa.,Decisions with Multiple Objectives: Preferences and Value
Trade-Offs,Cambridge University Press, 1993.
[27] Kazuki Narishige ,et al.,”EUV Resist Curing Technique for LWR Reduction and Etch
Selectivity Enhancement”Etch Process Engineering Dept., Tokyo Electron Miyagi
Limited (Proc. of SPIE Vol. 8328 83280N-1)
[28] Saaty,T.L.,”Decision making with dependence and feedback-The analytic network
process.”,RWS Publication,1996.
[29] Saaty,T.L.,The Analytic Hierarchy Process,McGraw-Hill Internal Book,New
York,1980。
[30] Tamura,H.and K.Akazawa.,“Structural Modeling and Systems Analysis of Uneasy
Factor for Realizing Safe”,Journal of Telecommunication and Information Technology
4,91-95,2005.
網站資料
[31] 國際半導體產業協會http://www.semi.org/zh/node/87826
[32] 集邦科技(TrendForce) http://tw.dramexchange.com/research/2017/09/trendforce-dramexchange-NANDFLASH-20170927
[33] Tokyo Electron Limited http://www.tel.co.jp/ir/policy/mplan/index.htm
[34] 遠見雜誌https://www.gvm.com.tw/article.html?id=27216 |