無人機產品家族的協同設計與供應

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：15

、訪客IP：18.225.56.194

姓名

蔡東昕(Tung-Hsin Tsai) 查詢紙本館藏

畢業系所

工業管理研究所

論文名稱

無人機產品家族的協同設計與供應

相關論文

★ 應用MFM 與PPM 監控協同設計之執行流程	★ 應用DSM與DRFT於汽車電子之協同開發流程
★ 一協同設計專案團隊組成方法- 以安全監視器產品為例	★ 應用認知工程開發全球化光纖通訊系統
★ 羽絨產業策略規劃-應用品質機能展開分析法	★ 重電業協同專案管理績效之研究-以變電所統包工程為例
★ 以屬性導向新產品開發之流程塑模與分析– 以醫療器材產業為案例	★ 以品質機能展開法應用於主管管理職能之建構
★ 應用參考模型以及流程建模改善供應鏈績效-以投影機產業為例	★ 協同產品開發之流程管理 - 以汽車零件為例
★ 配電系統之高壓電纜接頭供應商評選	★ 應用品質機能展開於產品開發之流程分析-以刀鋒式伺服器為例
★ 實施精實六標準差改進製程良率－以機頂盒表面黏著技術為例	★ 太陽能模組產業之決策營運研究
★ 新產品開發階段導入替代料之流程建模及潛在風險分析	★ 應用實驗設計研發PET複合膜及改善厚膜翹曲問題

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

無人機(Drones)經過百年的發展，技術和產品逐漸成熟。近年來，無人機廣泛應用於，農業、物流業、電子業及製造業等不同產業，因此無人機產品為了因應不同顧客要求，而做出不同的設計與開發。隨著工業4.0時代來臨，各家廠商紛紛投入無人機產品開發、科技研發及工作流程之中，一波由無人機引發的空中機器人革命浪潮即將來臨。
為此，將所有無人機的相關技術、零組件及供應商，進行模組化的整合。在一個無人機產品家族，可以用功能、尺寸、客製化程度等面向區分各種無人機，如此一來，廠商可以因應變化快速且多樣的需求環境，同時也可以有效的管控生產成本，避免資源浪費。
本研究以「無人機產業為例」，設想在「工業4.0的環境」下，藉由設計結構矩陣(Design Structure Matrix, DSM)，分析無人機的零組件和供應商之間的關係，再以多領域結構(Multiple-Domain Matrix , MDM)，規劃出「無人機產品家族」，以增進無人機產品開發的效率。

摘要(英)

Unmanned aerial vehicles (UAV) after a century of development, technology and products gradually mature. In recent years, UAV has been widely used in different industries, such as agriculture, logistics, electronics and manufacturing. Therefore, UAV product must be designed and developed according to different customer requirements. With the advent of the era of Industry 4.0, manufacturers have invested in UAV product development, technology research and development and workflow. The air robot revolution triggered by unmanned aerial vehicles is coming.
For this reason, all the UAV-related technology, Components and supply chain for modular integration. In a UAV product family, it can be used to distinguish UAVs from function, size, customization degree. As a result, manufacturers can respond to changes in a fast and diverse demand environment, but also effective control of production costs, avoid waste of resources.
In this paper, we are based on "UAV industry", we will plan to build the basic architecture and product activity flow of the UVA product under the "Industry 4.0 Environment", by Designing Structure Matrix (DSM), analyzes the UVA the spare part and between the UVA supplier′s relations, again by the Multi-Domain Structure (MDM), planning a "collaborative design and collaborative supply of UAV family of products", to enhance the efficiency of UAV product development.

關鍵字(中)

★ 工業4.0
★ 無人機
★ 產品家族
★ 設計結構矩陣(DSM)
★ 多領域結構(MDM)

關鍵字(英)

★ Industry 4.0
★ Unmanned aerial vehicles(UAV)
★ Product Family
★ Designing Structure Matrix(DSM)
★ Multi-domain structure(MDM)

論文目次

中文摘要 i
Abstract ii
目錄 iii
圖目錄 v
表目錄 vi
一、緒論 1
1-1 研究背景與動機 1
1-2 研究目的與方法 2
1-3 研究架構 2
二、文獻探討 3
2-1 工業4.0 3
2-1-1 工業4.0之定義 3
2-1-2 工業4.0之環境 4
2-2 協同設計與協同供應 7
2-2-1 協同設計 7
2-2-2 協同供應 10
2-3 模組化設計與產品家族 12
2-3-1 模組化設計 12
2-3-2 產品家族 13
三、研究方法 14
3-1 研究架構 14
3-1-1 研究方法 14
3-1-2 方法架構圖 14
3-2 設計結構矩陣 15
3-2-1 產品架構之設計結構矩陣 18
3-2-2 組織架構之設計結構矩陣 19
3-3 多領域矩陣 21
四、方法應用 24
4-1 無人機產業介紹 24
4-1-1 無人機之定義與應用 24
4-1-2 無人機發展趨勢 26
4-2 應用設計結構矩陣於無人機 28
4-2-1 產品架構之設計結構矩陣 28
4-2-2 組織架構之設計結構矩陣 31
4-3 應用多領域結構矩陣於無人機 34
五、結論與未來研究方向 35
5-1 結論 35
5-2 未來研究方向與建議 36
參考文獻 37

參考文獻

1. Akintola, Y., V. Senthilkumar and D.S. Root, “Identification of Process, Team and Tool Depdencies in Building Information Modelling(BIM)Implementation Using Multi-Domain Mapping(MDM) - A Theoretical Framework”, 17th International Dependency and Structure Modeling Conference, 2015.
2. Browing, T.R., “Applying the Design Structure Matrix to System Decomposition and Integration Problem：A Review and New Directions”, IEEE Transaction on Engineering Management, Vol 48, pp. 292-306, 2001.
3. Browing, T.R. and S.D. Eppinger, Design Structure Matrix Methods and Applications, Cambridge, MA, USA: MIT Press,2012.
4. Bunse, B., H. Kagermann and W. Wahlster, “Industrie 4.0 Smart Manufacturing for the Future”, Germany Trade and Invet, 2014.
5. Browing, T.R., “Design Structure Matrix Extensions and Innovations: A Survey and New Opportunities”, IEEE Transaction on Engineering Management, 2015.
6. Buzuku, S., T. Kassi and A. Kraslaswki, “Overview of the Interdependencies of Barriers for Implementing Eco-Design Initiatives: DSM and Boolean Visualization Approach”, 19th International Dependency and Structure Modeling Conference, 2017.
7. Chowdhury, S., V. Maldonado, W. Tong and A. Messac, “Comprehensive Product Platform Planning(CP3) For a Modular Family of Unmanned Aerial Vehicles”, Proceedings of the ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, Oregon, USA, 2013.
8. Danilovic, M and T.R. Browing, “Managing Complex Product Development Projects with Design Structure Matrices and Domain Mapping Matrices”, International Journal of Project Management, 2007.
9. Julie, W.G., Case Studies in DSM: Utilizing the Design Structure Matrix to Improve New Product Introduction, Massachusetts Institute of Technology, 2007.
10. Kumar, V., P.S. Shirodkar, J.A. Camelio and J.W. Sutherland, “Value Flow Characterization During Product Lifecycle to Assist in Recovery Decisions”, International Journal of Production Research, Vol 45, pp. 18-19, 2007.
11. Kumar, G. and R.N. Banerjee, “An Implementation Strategy for Collaboration in Supply Chain: an Investigation and Suggestions”, International Journal of Services and Operations Management, Vol 11 no.4, pp. 407-427, 2012.
12. Lee, P. and R. Higgons, “Qi3 Insight: Unmanned Aerial Vehicles - Growing Markets in a Changing World”, Taylor Vinters LLP, Vol 7, 2014.
13. Lee, J., B. Bagheri, H.A. Kao and E. Lapira, “Industry 4.0 and Manufacturing Transformation”, Manufacturing Leadership Journal, pp.36-43, 2015.
14. Lee, W.T., S.P. Ma, S.J. Lee, P.J. Law and T.S. Chang, “Extending the Multiple-Domain Matrix by Using Business Process Model and Notation for Business Process Analysis”, IEEE 12th International Conference on e-Business Engineering, pp.311-318, Beijing, China, 2015.
15. McCord, K.R. and S.D. Eppinger, “Managing the Integration Problem in Concurrent Engineering”, MIT Sloan School of Management, Working Paper no. 3594., 1993.
16. Meyer, M.H. and A.P. Lehnerd, The Power of Product Platforms, The Free Press, New York., 1997.
17. Maurer, M. and U. Lindemann, “The Application of the Multiple-Domain Matrix”, IEEE International Conference on Systems, Man and Cybernetics, pp.2487-2493, Singapore, 2008.
18. Maheswari, J.U, and K. Varghese, “A Structured Approach to Form Dependency Structure Matrix for Construction Projects”, 22nd International Symposium on Automation and Robotics in Construction, Ferrara(Italy), 2005.
19. Minogue, P., “New Product Development Visualization & Optimization using DSMs”, 17th International Dependency and Structure Modeling Conference, 2015.
20. Maslari?, M., S. Nikolicic and D. Mir?eti?, “Logistics Response to the Industry 4.0: The Physical Internet”, Open Engineering formerly Central European Journal of Engineering, Vol 6, pp.511-517, 2016.
21. Pimmler, T.U. and D.S. Eppinger, Integration Analysis of Product Decompositions. Proceedings of the ASME International Design Engineering Technical Conferences (Design Theory & Methodology. Conference), Minneapolis, MN., 1994.
22. Steward, D.V., “The Design Structure System: A Method for Managing the Design of Complex Systems”, IEEE Transactions on Engineering Management, pp. 71–74, 1981.
23. Worren, N., “Organizing from the Ground up: Developing a DSM Based Tool for Organization Design”, 19th International Dependency and Structure Modeling Conference, 2017.
24. Yu, J and H. Zhan, “Product Family Knowledge Modeling for Mass Customization”, International Joint Conference on Computational Sciences and Optimization, 2009.
25. Yamagishi, K., K. Seki, K. Ohtomi and H. Nisimuta, “MDM-Based Kansei Design Approach to Appeal on Customer Senses for Products”, 17th International Dependency and Structure Modeling Conference, 2015.
26. 劉建綱、馬安和王寧生，「基於設計結構矩陣的產品結構模塊聚類方法，華南理工大學學報，2006。
27. 朱海成，2017管理資訊系統，初版，碁峰出版，11-1到11-10頁，2016。
28. 廖一青，「產品協同設計模式之研究」，國立台北科技大學商業自動化與管理研究所，2002。
29. 吳立仁，「產品多樣化設計方法研究」，國立成功大學機械工程研究所，2002。
30. 唐敦兵，基於設計結構矩陣DSM的產品設計與開發，科學出版社，2009。

指導教授

高信培(Hsing-Pei Kao)

審核日期

2018-7-20

推文