姓名 |
劉玟萱(Wen-Shiuan Liu)
查詢紙本館藏 |
畢業系所 |
工業管理研究所在職專班 |
論文名稱 |
運用六標準差改善採購簽審流程-以S公司為例
|
相關論文 | |
檔案 |
[Endnote RIS 格式]
[Bibtex 格式]
[相關文章] [文章引用] [完整記錄] [館藏目錄] 至系統瀏覽論文 ( 永不開放)
|
摘要(中) |
六標準差起源於1980年代,最初由摩托羅拉公司將其運用在改革公司生產流程上,發展至今,雖然並非嶄新的觀念和工具,但它卻擁有著獨特之處,善用人力資源、資料數據、統計工具等,來改善製程品質,減少不良或錯誤發生。其中,六標準差的步驟DMAIC,更是常被用來做為流程改善的工具之一。
本研究以國內S公司為例,以採購簽審流程改善作一探討,近年來S公司生產型態偏向多量多樣化,為滿足顧客需求,除品質要好,交期也要快,由於人力、設備、產能有限,可能呈現抗衡或難以如期如質達成。為了紓解產能負荷,委請民間企業加工生產,因而衍生購案需求,而購案範圍覆蓋了從原物料到製成品之間的料件採購、勞務外包、供料委外之全過程,尤其在產能外包的這部分更加有急迫性。因此,減少不必要的購案流程為本研究縮短簽審周期的關鍵因素。如何運用不同的改善方法、步驟、使用工具,使其降低人員作業疏失與加速流程效率,已是首要任務。
為實現S公司的願景目標,必須創新加以突破現況、提升實力,本研究運用六標準差的DMAIC手法,探討如何改善陳舊的管理做法與減少採購流程中無附加價值的作業步驟,解決執行過程中所衍生之問題,並以理論架構與實務應用方法提出具體的採購流程改善策略,協助企業改善流程、縮短人員作業時間,以及增加企業競爭力。
研究結果顯示,透過六標準差的DMAIC手法,可以有效的幫助S公司找到影響採購流程的因子,以及這些因子所造成的問題程度,接著,再利用特性要因圖找到真因,針對這些關鍵因子以系統結構化分析,提出改善對策,並持續管制,預期改善效益能成功簡化流程、統一作業,以及減少人力成本。 |
摘要(英) |
Six Sigma originated in the 1980s. It was originally used by Motorola to reform the company’s production process. It has developed up to this day. Although it isn’t a brand-new concept and tool, but it has its own unique features. It makes good use of human resources, data, statistical tools, etc., to improve process quality and reduce defects or errors. Among them, the step of Six Sigma, DMAIC, is often used as one of the tools for process improvement.
This study takes the domestic S company as an example, and discusses the improvement of the procurement approval process. In recent years, the S company′s production pattern has tended to be more and more diversified. In order to meet customer needs, in addition to good quality, fast delivery is due to manpower and equipment. The production capacity is limited, and may be rendered difficult to compete on schedule to reach such quality. In order to relieve the capacity load, private enterprises were entrusted to process and produce, which resulted in a demand for purchase cases. The purchase cases covered the entire process of material procurement from raw materials to finished products, labor outsourcing, and outsourcing of materials, especially This part of capacity outsourcing is even more urgent. Therefore, reducing unnecessary purchase procedures is a key factor in shortening the approval cycle for this study. How to use different improvement methods, steps, and tools to reduce personnel negligence and accelerate process efficiency is the primary task.
In order to achieve S company’s vision and goals, it is necessary to innovate to break through the current situation and enhance its strength. This study uses the DMAIC method of six sigma to explore how to improve outdated management practices and reduce the value-added operation steps in the procurement process, and solve the problem in the implementation process Based on the problems that arise, the theoretical framework and practical application methods are used to propose specific procurement process improvement strategies to assist companies in improving processes, shortening personnel work time, and increasing corporate competitiveness.
The research results show that through the six sigma DMAIC method, it can effectively help S company find the factors that affect the procurement process and the degree of problems caused by these factors. Then, use the characteristic factor map to find the true cause, and target these key factors. System structure analysis, improvement countermeasures, and continuous control are expected to be able to simplify processes, unify operations, and reduce labor costs. |
關鍵字(中) |
★ 六標準差 ★ 流程改善 ★ DMAIC |
關鍵字(英) |
★ six sigma ★ DMAIC ★ process improvement |
論文目次 |
摘要 i
Abstract ii
誌謝 iv
目錄 v
圖目錄 vii
表目錄 viii
第一章 緒論 1
1.1 研究背景 1
1.2 研究動機 2
1.3 研究目的 3
1.4 研究架構與方法 4
第二章 文獻探討 6
2.1 六標準差起源 6
2.2 六標準差定義 7
2.3 六標準差推行手法 9
第三章 研究方法 14
3.1 六標準差的工具 14
3.2 研究手法 25
第四章 個案研究 34
4.1 S公司概況 34
4.2 S公司組織管理簡介 34
4.3 S公司現況採購流程 36
4.4 問題描述 39
4.5 研究步驟 40
4.5.1 Define界定階段 44
4.5.2 Measure衡量階段 45
4.5.3 Analyze分析階段 50
4.5.4 Improve改善階段 54
4.5.5 Control控制階段 57
4.6 期望執行成效 57
第五章 研究結論與建議 60
5.1 研究結論 60
5.2 研究建議 61
參考文獻 62
|
參考文獻 |
中文文獻
1. 周信妏,黃國格,李虹葶與鄭春生 (2017). "應用六標準差手法改善即食食品之生產不良率",品質學報 24(1): 29-44。
2. 格雷.布魯,羅勃特.郎斯比著,丁惠民譯 (2004),六標準差設計立即上手,美商麥格羅‧希爾 (McGraw-Hill) 國際出版公司。
3. 格雷.布魯著,丁惠民譯 (2003),六標準差管理立即上手,美商麥格羅•希爾(McGraw-Hill)國際出版公司。
4. 麥可.喬治,大衛.羅蘭,馬克.普萊斯,約翰.馬西著,丁惠民譯 (2006),精實六標準差工具手冊,台北,美商麥格羅希爾國際股份有限公司台灣分公司。
5. 麥克.喬治著,樂為良譯 (2002),精實六標準差,台北,美商麥格羅希爾國際股份有限公司台灣分公司。
6. 麥克.喬治著,樂為良譯 (2003),精實六標準差,美商麥格羅•希爾(McGraw-Hill)國際出版公司。
7. 黃永東 (2008),"政府部門之精實六標準的 DMAIC 實務作法",品質月刊 44(10): 32-36。
8. 鄭雅穗,盧以詮,鄭雅文與李松澤 (2019),"應用 HQKMS-DMAIC 方法論建立醫療品質指標管理機制",電子商務學報 21(2): 147-170。
英文文獻
9. Arafeh, M., M. A. Barghash, E. Sallam and A. AlSamhouri (2014). "Six Sigma applied to reduce patients′ waiting time in a cancer pharmacy." International Journal of Six Sigma and Competitive Advantage 8(2): 105-124.
10. Breyfogle III, F. W., J. M. Cupello and B. Meadows (2000). Managing six sigma: A practical guide to understanding, assessing, and implementing the strategy that yields bottom-line success, John Wiley & Sons.
11. Celik, S., M. T. Taner, G. Kağan, M. Şimşek, M. K. Kağan and İ. Öztek (2016). "A retrospective study of six sigma methodology to reduce inoperability among lung cancer patients."
12. Chen, H., K. Chen, T. Chang and C. Hsu (2010). "An application of six sigma methodology to enhance leisure service quality." Quality & quantity 44(6): 1151-1164.
13. Chen, K., C. Shyu and M. Kuo (2010). "An application of six sigma methodology to reduce shoplifting in bookstores." Quality & Quantity 44(6): 1093-1103.
14. Ertürk, M., M. Tuerdi and A. Wujiabudula (2016). "The effects of six sigma approach on business performance: A study of white goods (home appliances) sector in Turkey." Procedia-Social and Behavioral Sciences 229: 444-452.
15. Huang, C.-T., K.-S. Chen and T.-C. Chang (2010). "An application of DMADV methodology for increasing the yield rate of surveillance cameras." Microelectronics Reliability 50(2): 266-272.
16. Hung, H.-C. and M.-H. Sung (2016). "Applying lean six sigma to reduce productioncycle time: An empirical study in the TFT-LCD industry." 品質學報 23(4): 228-247.
17. Hwang, Y.-J., H.-R. Wei and S.-H. Yang (2017). "Applying six sigma DMARC methodology to improve the inventory control system." 品質學報 24(4): 280-299.
18. Ishikawa, K. (1982). Guide to quality control.
19. Kelsey, W., K. Logan and G. Carver (2013). "Application of six sigma method to the Production process of food in the food industry to reduce cost." Advances in food science and technology 1(8): 100-111.
20. Klefsjö, B., H. Wiklund and R. L. Edgeman (2001). "Six sigma seen as a methodology for total quality management." Measuring business excellence.
21. Lighter, D. E. (2014). "The application of Lean Six Sigma to provide high-quality, reliable pediatric care." International Journal of pediatrics and adolescent medicine 1(1): 8-10.
22. Miller, R. I. (1991). Applying the deming method to higher education for more effective human resource management, ERIC.
23. Montgomery, D. C. (2009). Introduction to statistical quality control, 6th edition. Hoboken, NJ, Wiley.
24. Oakland, R. J. and J. S. Oakland (2018). Statistical process control, Routledge.
25. Pugna, A., R. Negrea and S. Miclea (2016). "Using six sigma methodology to improve the assembly process in an automotive company." Procedia-Social and Behavioral Sciences 221(Supplement C): 308-316. |
指導教授 |
陳振明(Jen-Ming Chen)
|
審核日期 |
2021-1-13 |
推文 |
facebook plurk twitter funp google live udn HD myshare reddit netvibes friend youpush delicious baidu
|
網路書籤 |
Google bookmarks del.icio.us hemidemi myshare
|