博碩士論文 109456021 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:9 、訪客IP:3.135.247.188
姓名 盧羿君(Yi-Chun Lu)  查詢紙本館藏   畢業系所 工業管理研究所
論文名稱 供應鏈訂單需求預測優化與策略分析
相關論文
★ 二階段作業研究模式於立體化設施規劃應用之探討–以半導體製造廠X及Y公司為例★ 推行TPM活動以改善設備總合效率並提昇 企業競爭力...以U公司桃園工廠為例
★ 資訊系統整合業者行銷通路策略之研究★ 以決策樹法歸納關鍵製程暨以群集法識別關鍵路徑
★ 關鍵績效指標(KPI)之建立與推行 - 在造紙業★ 應用實驗計劃法- 提昇IC載板錫球斷面品質最佳化之研究
★ 如何從歷史鑽孔Cp值導出新設計規則進而達到兼顧品質與降低生產成本目標★ 產品資料管理系統建立及導入-以半導體IC封裝廠C公司為例
★ 企業由設計代工轉型為自有品牌之營運管理★ 運用六標準差步驟與FMEA於塑膠射出成型之冷料改善研究(以S公司為例)
★ 台灣地區輪胎產業經營績效之研究★ 以方法時間衡量法訂定OLED面板蒸鍍有機材料更換作業之時間標準
★ 利用六標準差管理提升生產效率-以A公司塗料充填流程改善為例★ 依流程相似度對目標群組做群集分析- 以航空發動機維修廠之自修工件為例
★ 設計鏈績效衡量指標建立 —以電動巴士產業A公司為例★ 應用資料探勘尋找影響太陽能模組製程良率之因子研究
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   至系統瀏覽論文 ( 永不開放)
摘要(中) 現今是一個強調低庫存高利潤的時代,在企業中如何平衡庫存與銷售需求的數量,一直是供應鏈的一大課題。因為台灣先天島國資源因素限制,在化工製造業生產上原料進口依賴度非常高,導致原材料上的進口需求龐大,進口庫存與實際銷售產生落差的話即會產生庫存過量或是短缺。
而2019年爆發新冠肺炎疫情後,全球運輸不穩,各國因疫情嚴峻陸續推出封城、邊境管制等政策與人力問題導致全球物料運輸中斷,而仰賴進口生存的台灣製造業因難以即時調整,導致供應鏈斷鏈長鞭效應產生。在此不穩定的狀況下,相對地增加許多物流與庫存成本,也凸顯出企業對於需求和供應的預測非常重要,因為企業不論原物料或是成品的庫存都是由訂單需求而來。
因此本研究將針對企業內部訂單需求預測的方法分析,比較移動平均法、指數平滑法、類神經網路三種預測手法的預測準確度找出適合企業訂單預測使用的工具優化預測方法,並搭配生產模式策略分析,以期將企業的存貨計畫以更有效的預測來做規劃,可以降低庫存成本和長鞭效應影響並提升供應鏈績效。
摘要(英) How to balance inventory and sales demand has always been a topic in the supply chain in target of low inventory and high profit. The chemical manufacturing industry is highly dependent on raw material imports in Taiwan due to the resource constraints of Taiwan′s congenital island.
The severity of the epidemic impacted by COVID-19 outbreak in 2019. Various countries have successively published restriction policies such as city closures and border control that global traffic status has been interrupted. Manpower issues have disrupted the movement of supplies around the world which caused supply chain’s difficulty to adjust in time resulting in a bullwhip effect. In this unstable situation, a large number of logistics and inventory costs are relatively increased, and it also highlights the importance of supply and demand forecasting for enterprises, because enterprises′ raw material or finished product inventory is based on order demand.
Therefore, this research will analyze the forecasting methods of the internal order demand of enterprises, compare the forecasting accuracy of the three forecasting methods of moving average method, exponential smoothing method, and neural network method, and find out the tool optimization forecasting method which is suitable for enterprise order forecasting. Strategic analysis to forecasting method and company′s production type with more effective model can reduce inventory costs and the impact of the bullwhip effect, and improve supply chain performance.
關鍵字(中) ★ 供應鏈管理
★ 訂單需求預測
★ 移動平均法
★ 指數平滑法
★ 類神經網路
★ 存貨生產
★ 訂單生產
關鍵字(英) ★ Supply chain management
★ Forecasting
★ Moving average method
★ Exponential smoothing method
★ Neural network
★ Make-to-Stock, MTS
★ Make-to-Order, MTO
論文目次 目錄
摘要 ii
Abstract iii
致謝 iv
第一章 緒論 1
1.1 研究背景 1
1.2 研究目的與範圍 2
1.3 研究流程 3
第二章 文獻探討 4
2.1 供應鏈管理 4
2.2 訂單履行與生產模式 6
2.3 供應鏈存貨管理 8
2.4 長鞭效應 10
2.5 預測簡介 12
2.6 類神經網路 15
第三章 研究方法 19
3.1 研究架構 19
3.2 ABC 分析法 20
3.3 移動平均法 21
3.4 指數平滑法 21
3.5 倒傳遞類神經網路 22
3.6 誤差程度判別標準 24
第四章 個案研究 26
4.1 個案公司簡介與現行預測手法探討 26
4.2 資料限制與分析 27
4.3 預測模型建立 28
4.4 預測模型比較 33
4.5 預測與生產模式策略分析 34
第五章 研究結論與建議 36
5.1 研究結論 36
5.2 後續研究建議 37
參考文獻 38
中文文獻 38
英文文獻 39
參考文獻 中文文獻
1. 蘇怡如(2005),供應鏈管理下需求與預測控制之研究,逢甲大學交通工程與管理學系碩士班,碩士論文,台中市。
2. 張福榮著(2015),圖解供應鏈管理,五南出版社。
3. 卡部拉 (Chopra, Sunil),曼德爾 (Meindl, Peter) 原著,陳銘崑 譯,(2011) 供應鏈管理,臺灣培生教育出版。
4. 黃庭鍾(2003),企業因應長鞭效應之存貨政策研究—以我國主機板製造業為例,國立東華大學企業管理研究所,碩士論文,花蓮市。
5. William J. Stevenson著,何應欽 編譯 (2013),作業管理,第十一版,麥格羅希爾出版集團,台灣分公司。
6. 蘇雄義 編著(2011),供應鏈管理 原理.程序.實務,智勝文化出版。
7. 陳榮志(2008),預測分析應用於訂購模式之研究-以A公司為例,國立成功大學工程管理研究所,碩士論文,台南市。
8. 張斐章,張麗秋,黃浩倫著(2003),類神經網路:理論與實務,臺灣東華書局出版。
9. 仇士元(2003),加總模型的預測效果-以台灣地區汽車銷售量資料為例,長庚大學企業管理研究所,碩士論文,新北市。
10. 蘇慕君(2004),短期訂單預測模型之研究-以PDA產業為例,中原大學資訊管理學系,碩士論文,桃園市。
11. 黎鑑輝(2007),機車市場銷售預測實證研究,長庚大學企業管理研究所,碩士論文,新北市。
12. 張昱仁(2009),以類神經網路技術預測半導體價格之研究-以DRAM為例,逢甲大學資訊電機工程碩士在職專班,碩士論文,台中市。
13. 蔡宗憲、李治綱、魏建宏 (2006),短期列車旅運需求之類神經網路預測模式建構與評估,運輸計畫季刊第三十五卷第四期,頁475~506。

英文文獻
1. Douglas M. Lambert, Martha C. Cooper, and Janus D. Pagh, (1998) “ Supply Chain Management: Implementation Issue and Research Opportunities.” The International Journal of Logistics Management 9, no. 2 P.2..
2. Orilcky Joseph., (1975) ” Material Requirement Planning”, McGraw Hill, New York.
3. Lee, H.L., Padmanabhan, V. and Whang,S., (1997), “The bullwhip Effect in supply chains”, Sloan Management Review, Vol. 38, No.3, P.93~101
4. Lee, H.L., Padmanabhan, V. and Whang,S., (1997), “Information Distortion in a Supply Chain:The bullwhip Effect”, Management Science, Vol. 43, No.4, P.546~558
5. Ralf W. Seifert (2015)“Does the bullwhip still strike? Detecting variability in the supply chain.”
From: https://www.imd.org/research-knowledge/articles/does-the-bullwhip-still-strike/
6. Wallace, J. H. and Mark, L.S. (2001). “Factory Physics” McGraw Hill , New York.
7. Tiacci, L. and Saetta, S., (2008) “An approach to evaluate the impact of interaction between demand forecasting method and stock control policy on the inventory system performances”. International Journal of Production Economics, In Press, Corrected Proof, Available online.
指導教授 曾富祥(Fu-Shiang Tseng) 審核日期 2022-7-28
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明