中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/10335
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 42723237      在线人数 : 1234
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/10335


    题名: 利用氫和氧電漿處理透明電極與低壓沉積本質非晶矽鍺吸光層改善非晶矽基合金薄膜太陽能電池的效能;Improvements of Amorphous Si-Alloy Based Thin-Film Solar Cells with H2/O2- Plasma Treatments on Transparent Electrode and Deposition of i-a-SiGe:H Light Absorption Layer at Low Pressure
    作者: 闕仲宏;Jhong-Hong Cyue
    贡献者: 電機工程研究所
    关键词: 非晶矽基薄膜太陽能電池;PECVD;plasma treatment;solar cell
    日期: 2008-07-03
    上传时间: 2009-09-22 12:12:49 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 在本論文中,我們利用氫和氧電漿處理透明導電電極與低壓沉積製備非晶本質矽鍺膜來提升非晶矽基薄膜太陽能電池的特性。首先,因串聯電阻對非晶矽基薄膜太陽能電池的特性有相當大的影響,利用氫和氧電漿可去除透明導電電極表面之碳氫化合物污染,提高其功函數,並降低其與非晶薄膜之間的蕭特基位障,實驗結果顯示先用氫氣電漿(100 W, 0.4 torr, 基板溫度=25℃)處理5分鐘再用氧氣電漿(55 W, 0.15 torr, 基板溫度=25℃)處理5分鐘可明顯提昇元件特性。此外,我們在低壓沉積非晶本質矽鍺吸光層用以減少薄膜中的Si=H2 鍵結,進而提升非晶矽基薄膜太陽能電池的特性,所製作出的梯度非晶矽基薄膜太陽能電池,其轉換效率可達到百分之 3.63。 In this thesis, the H2/O2-plasma treatments on transparent indium-tin-oxide (ITO) electrode and deposition of i-a-SiGe:H absorption layer at low pressure have been used to improve the performance of amorphous Si-alloy based thin-film solar cells. Firstly, since that the series resistance between the ITO electrode and amorphous layer plays an important role in the performance of a solar cell, the in-situ plasma treatments was employed to improve the contact and it was found that the performance of a p-i-n a-Si:H thin-film solar cell could be enhanced with the H2-plasma (100 W, 0.4 torr, 25 ℃ and 5 min.) and then O2-plasma (55 W, 0.15 torr, 25 ℃ and 5min.) treatments on ITO electrode. This was due to the combination of H2- and O2-plasma treatments could remove the hydrocarbon compounds and increase the work function of ITO electrode. Hence, the Schottky barrier height between the ITO and amorphous layer could be lowered. In addition, the i-a-SiGe:H absorption layer was deposited at a lower pressure of around 0.25 torr with a plasma-enhanced chemical vapor deposition system, to reduce the amount of Si=H2 bonds in the film and hence improve the performance of graded ITO/p-SiC:H/buffer layer (i-a-SiC:H)/i-a-Si:H/interface layer/i-a-SiGe:H/n-a-Si:H/Al solar cell. In this study, the highest obtainable conversion efficiency of this graded solar cell was 3.63 %.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明