成長於矽基板之半極化氮化鎵磊晶層特性研究

NCU Institutional Repository > 資訊電機學院 > 電機工程研究所 > 博碩士論文 > Item 987654321/10412

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/10412

题名:	成長於矽基板之半極化氮化鎵磊晶層特性研究
作者:	伍金記;Chin-chi Wu
贡献者:	電機工程研究所
关键词:	半極化氮化鎵;矽基板;semiploar GaN;(001)Si
日期:	2009-06-24
上传时间:	2009-09-22 12:15:58 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	本論文報告利用矽當作成長氮化鎵材料的基板，成功將量子井結構成長於傾斜7°(001)Si 圖形化基板上，並分析其結構與光學特性。由於氮化鎵材料與矽基板的晶格常數與熱膨脹係數差異甚大，為了避免氮化鎵材料產生裂縫，本研究藉由低溫氮化鋁緩衝層及多孔氮化矽以釋放應力和減少缺陷密度。為了使氮化鎵的發光效率提高，本研究於傾斜7°(001)Si 圖形化基板上成長半極化(1-101)氮化鎵材料，並發現所產生的缺陷位置都在相鄰的氮化鎵區塊接合處，而在接合處以外的地方則幾乎無缺陷存在。X-ray 繞射實驗也顯示在(1-101)氮化鎵上成長氮化銦鎵時，銦的含量會較在(0001)面少，且成長速率較慢。很可能是因為銦含量低的關係，其表面並無V 形缺陷。另經變溫光激螢光量測得知在(1-101)面上的氮化銦鎵量子井具較高活化能，可能是因為載子所需跨越位障比(0001)面較高。 The main challenge for growing GaN on Si is overcome the cracking issue caused by the large mismatch in lattice constants and thermal expansion coefficients between GaN and Si. Various growth methods, such as LT-AlN interlayer, AlGaN graded layer, and in situ SiN layer, have been proposed to cope with this issue. These interlayers are usually effective in both strain reduction and dislocation blocking. Using these techniques, we are able to produce blue light-emitting diodes with a maximum output power of 1.2 mW at 80 mA. In order to improve the luminescence efficiency, growth of semi-polar (1-101) GaN on patterned 7-degree off (001) Si substrate is investigated. It is found that high quality GaN can be obtained by this method and defects are localized in the area, at which the coalescence of GaN crystal occurs. InGaN quantum wells grown on the template exhibit no V-defect. Their photoluminescence intensity is not sensitive to In content for the In content studied. They also have higher activation energy and show less localization effect.
显示于类别:	[電機工程研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....