Wireless communication performance based on IEEE 802.11p R2V field trials

NCU Institutional Repository > 資訊電機學院 > 通訊工程學系 > 期刊論文 > Item 987654321/106158

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/106158

题名:	Wireless communication performance based on IEEE 802.11p R2V field trials
作者:	林嘉慶;Lin, Jia-Chin;Lin, Chi-Sheng;Liang, Chih-Neng;Chen, Bo-Chiuan
贡献者:	資訊電機學院通訊工程學系
关键词:	Automobiles;Automotive components;Automotive engineering;Communication;Communication systems;IEEE 802.11 Standards;Intelligent transportation systems;Intelligent vehicle highway systems;Loss measurement;Markets;Next generation networking;Spreads;Telematics;WiMAX;Wireless communication;Wireless communications
日期:	2012-05-16
上传时间:	2026-04-23 13:11:33 (UTC+8)
出版者:	Institute of Electrical and Electronics Engineers Inc.;New York: IEEE
摘要:	摘要： Next-generation telematics solutions are being driven by the maturation of recently deployed intelligent transportation systems, assisted by the integration of and rapid collaboration with information communication technology markets and the automotive industry. Examples of this trend can be found in DSRC contexts in which Wi-Fi and WiMAX have become very relevant in vehicular environments. Comprehensive field trials were conducted and relevant measurements were collected in physical environments to investigate the possible environmental factors that occur in roadside-unit-to-vehicle communication scenarios. In these carefully controlled automobile experiments, the most representative parameters are measured and analyzed for DSRC in dynamic environments (e.g., packet loss, latency, and delay spread). Using a systematic testing procedure and through measurement analysis, the communication performance and the operating reliability of wireless communications can be effectively verified; insightful improvements and helpful suggestions and contributions may thus be achieved for telematics system designs. Furthermore, a practical, reasonable, and standardized testing procedure is proposed, and it can be utilized in equipment verification and product certification. 其他題名： COM-M 出版者： New York: IEEE 出版日期： 2012-05-01 出處： IEEE communications magazine, 2012-05, Vol.50 (5), p.184-191 資源來源： IEEE Xplore (NTUSG) 版權： Copyright The Institute of Electrical and Electronics Engineers, Inc. (IEEE) May 2012 識別號： ISSN: 0163-6804 識別號： EISSN: 1558-1896 識別號： DOI: 10.1109/MCOM.2012.6194401 識別號： CODEN: ICOMD9
显示于类别:	[通訊工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	47	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....