Experimental study on floating-zone tube growth and comparison with computer simulation

NCUIR > Engineering College > National Central University Department of Chemical & Materials Engineering > journal & Dissertation > Item 987654321/26602

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/26602

Title:	Experimental study on floating-zone tube growth and comparison with computer simulation
Authors:	Hsieh,WC;Lan,CW
Contributors:	化學工程與材料工程學系
Keywords:	CRYSTALS
Date:	1996
Issue Date:	2010-06-29 17:32:06 (UTC+8)
Publisher:	中央大學
Abstract:	Floating-zone (FZ) tube growth of NaNO3 was conducted to study the effect of process parameters and the feasibility of the process. Due to the effect of surface tension, the grown tube size was smaller than the feed. The size reduction became more significant with increasing zone length and decreasing feed tube size. The grown tube size was also sensitive to the pulling speed. Computer simulation was conducted for the experiments, and good agreement was found. In the present study, downward growth was not successful, and the difficulties were illustrated through computer simulation. In all casts, the observed melt/solid interfaces were very convex, and this could be explained through calculated thermocapillary convection. As compared with rod growth, tube growth was more difficult due to its poorer zone stability. Two failure modes of the zone were observed during crystal growth, and they were different from those observed in rod growth.
Relation:	JOURNAL OF CRYSTAL GROWTH
Appears in Collections:	[National Central University Department of Chemical & Materials Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	654	View/Open

社群 sharing