A NURBS CURVE INTERPOLATOR WITH JERK-LIMITED TRAJECTORY PLANNING

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26827

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26827

题名:	A NURBS CURVE INTERPOLATOR WITH JERK-LIMITED TRAJECTORY PLANNING
作者:	Tseng,SJ;Lin,KY;Lai,JY;Ueng,WD
贡献者:	機械工程研究所
关键词:	PARAMETRIC INTERPOLATOR
日期:	2009
上传时间:	2010-06-29 18:01:11 (UTC+8)
出版者:	中央大學
摘要:	The control of the maximum acceleration and jerk in the trajectory planning of the CNC controller is very important because it affects the smoothness of the machined surface substantially. We proposed a parametric interpolator composed of a look-ahead stage and a real-time sampling stage for jerk-limited acceleration planning. A pre-sampling process was implemented in the look-ahead stage to identify the segment points, where the acceleration changed across zero. A check of the acceleration and jerk was implemented and the feedrate was modified accordingly. In addition, a backtracking process was carried out during the deceleration stage to ensure that the modified feedrate was satisfied. In the real-time sampling stage, an acceleration profile based on constant jerk was implemented for each region between two segment points. With this algorithm, we ensured that both the chord error and the maximum acceleration and jerk were within the allowable limits. Also, it kept the similarity of the speed profiles for adjacent cutting paths in zigzag machining.
關聯:	JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	869	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing