Cavitation behavior in superplastic 5083 Al alloy during multiaxial gas blow forming with lubrication

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/26839

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/26839

Title:	Cavitation behavior in superplastic 5083 Al alloy during multiaxial gas blow forming with lubrication
Authors:	Sun,PH;Wu,HY;Lee,WS;Shis,SH;Perng,JY;Lee,S
Contributors:	機械工程研究所
Keywords:	ALUMINUM-ALLOYS;CAVITY GROWTH;STRESS STATE;MG ALLOY;DEFORMATION;PRESSURE;FLOW
Date:	2009
Issue Date:	2010-06-29 18:01:26 (UTC+8)
Publisher:	中央大學
Abstract:	Despite its importance for industrial applications, the effect of lubrication on the cavitation behavior of superplastic materials has been given little attention. In this paper, a series of experiments were performed regarding bulging superplastic 5083 Al alloy sheet into dies with a cylindrical (cup) and rectangular (pan) die cavity for forming with and without lubrication, the formed parts were then evaluated to determine the effect of lubrication on the cavitation level evolution, thickness distribution, and void distribution. It was found that void shrinkage took place in the overlaid region for both forming with and without lubrication. The maximum void volume fraction could be effectively reduced for forming with lubrication: however, reductions in the maximum void volume fractions for cup forming were less significant than those for pan forming. (C) 2008 Elsevier Ltd. All rights reserved.
Relation:	INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Appears in Collections:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	785	View/Open

社群 sharing