English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42644610      線上人數 : 1034
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26840


    題名: CHARACTERISTICS OF RELIABILITY-DEPENDENT HAZARD RATE FOR COMPOSITES UNDER FATIGUE LOADING
    作者: Chen,CL;Tsai,YT;Wang,KS
    貢獻者: 機械工程研究所
    關鍵詞: RESIDUAL STRENGTH;MATRIX CRACKING;MODEL
    日期: 2009
    上傳時間: 2010-06-29 18:01:28 (UTC+8)
    出版者: 中央大學
    摘要: This paper studies the characteristics of a proposed reliability-dependent hazard rate function for composites under fatigue loading. The hazard rate function, in terms of reliability R, is in the form of e + c (1 - R)(p) called (ecp) model, where e denotes the imbedded defects of material strength, c the coefficient of strength degradation, and p the memory characteristics of distributions of both applied stress and fatigue strength during the cumulative damage process. By taking a typical residual strength model in Monte Carlo Simulation, this paper presents the time changing of the residual strength distribution and hazard rate of composite under various constant-amplitude cyclic stresses. The values of (e, c, p) are decided by fitting hazard rate function to the data generated in simulation. The results show that, under a suitable suggested value of e, p is a constant depending on the characteristics of stress distribution as well as the residual strength model used in Monte Carlo stimulation, and c is correlated to the maximum cyclic stress in a power-law relationship. Only by knowing the initial strength distribution and file maximum cyclic stress, the fatigue life can be easily estimated by integrating the reliability with time or its equivalent, i.e., the reciprocal of hazard rate function with reliability. Finally, by a proposed approximated equation of fatigue life, the (ecp) model is checked to be highly consistent with S-N curve in both the physical means and the equation form. The analysis presented here may be helpful ill designing and maintenance planning of composite under fatigue loading.
    關聯: JOURNAL OF MECHANICS
    顯示於類別:[機械工程研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML1281檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明