Analyses and measurements on bending performance of gas-assisted injection molded parts

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26909

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26909

题名:	Analyses and measurements on bending performance of gas-assisted injection molded parts
作者:	Chen,SC;Hu,SY;Chien,RD;Jeng,MC
贡献者:	機械工程研究所
关键词:	FINITE-ELEMENTS;SIMULATION;PENETRATION;MEMBRANE;PLATE
日期:	1999
上传时间:	2010-06-29 18:03:02 (UTC+8)
出版者:	中央大學
摘要:	Numerical simulation and experimental measurements were carried out to assess the bending behavior of gas-assisted injection-molded parts. Polystyrene plate parts of different thicknesses, designed with various channel geometries, were gas-assisted injection molded. Part flexible strength was measured by a bending test. It was found that part stiffness basically increases linearly with the inertia moment of the plate. Gas channel design, introducing an additional moment of inertia determined by the geometry of the channel section and the hollowed core, resulted in structural reinforcement of the part. An analysis algorithm based on DKT/VRT elements superimposed with beam elements, representing gas channels of various section geometries, was developed to evaluate part bending behavior. An equivalent diameter was assigned to the beam element so that both the original gas channel and the circular beam had the same moment of inertia. The results from this 2.5-dimensional model were also verified with three-dimensional analyses using the ANSYS program. The present simulations show reasonable accuracy upon comparison to bending tests and predictions from ANSYS. This investigation indicates that it is possible to use the same CAE finite-element mesh modeled for process simulation when performing part structure and warpage analyses, resulting in high computational efficiency. (C) 1999 John Wiley & Sons, Inc.
關聯:	ADVANCES IN POLYMER TECHNOLOGY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	486	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....