中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/26923
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 42691587      在线人数 : 1535
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26923


    题名: Impact fatigue of a polycarbonate/acrylonitrile-butadiene-styrene blend
    作者: Ho,MH;Hwang,JR;Doong,JL;Fung,CP
    贡献者: 機械工程研究所
    关键词: MECHANICAL-PROPERTIES;RESIDUAL-STRESSES;COMPOSITES;POLYPROPYLENE;MORPHOLOGY;BEHAVIOR;POLYMERS;NYLON-6
    日期: 1999
    上传时间: 2010-06-29 18:03:22 (UTC+8)
    出版者: 中央大學
    摘要: This study analyzes the impact properties of a polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) blend. The specimens were prepared under various injection molding conditions, including filling time, melting temperature, and mold temperature. Impact tests were performed with a Dynatup drop weight impact tester at different impact energies (10, 15, 20, 25 J). The fracture mechanism was examined with a scanning electron microscopy. The results indicated that the load-time history of the PC/ABS blend has approximately a sinusoidal form in impact. The best injection molding conditions are a filling time of 12 s, a melting temperature of 260 degrees C and a mold temperature of 80 degrees C. Tn this case, the specimen shows the highest energy absorbed in single impact, together with the highest impact number in impact fatigue. The impact number and the accumulation energy seem to follow an exponential curve as the impact energy decreases. The PC/ABS blend material clearly exhibited ductile fracture with a continuous reduction in strength by viscoplastic deformation. The higher the impact number, the higher the accumulation energy. The accumulation energy of impact fatigue with impact energy 10 J is about 35-45 times greater than the energy absorbed in single impact. Tearing, shear fracture, and plastic deformation are the major fracture mechanisms of the PC/ABS blend matrix in single impact and repeated impact conditions.
    關聯: POLYMER ENGINEERING AND SCIENCE
    显示于类别:[機械工程研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML771检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明