Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26928

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26928

题名:	Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts
作者:	Chien,RD;Chen,SC;Jeng,MC;Yang,HY
贡献者:	機械工程研究所
关键词:	SPIRAL TUBE;PENETRATION
日期:	1999
上传时间:	2010-06-29 18:03:29 (UTC+8)
出版者:	中央大學
摘要:	PS, PP and Nylon plate parts designed with gas channels having five different types of cross-section but with same section area were gas-assisted injection moulded (GAIM). Mechanical properties of GAIM parts were investigated via tensile and bending tests. Effects of part thickness, shape and associated dimensions of gas channels on tensile and bending properties of GAIM parts were examined. It was found that maximum tensile load and ultimate tensile stress show only slight influence from gas channel design and part thickness except Nylon parts which exhibit significant dependence on part thickness due to degree of crystallinity. Gas channel design, introducing additional moment of inertia, results in part structural reinforcement. Part stiffness and maximum bending load basically increases linearly with the moment of inertia and the section modulus of the plate, respectively. Gas channel design attached with top rib (shapes D and E) show the best effect of structural reinforcement. For brittle PS parts, plates with semicircular gas channel (shape A) exhibit maximum flexural strength. PS parts with rectangular gas channel design (shape B) can absorb more bending energy than the other designs. The present study provides part designers with a design guideline for choosing the most effective gas channel design to achieve a specific objective of part structural performance. (C) 1999 Elsevier Science Ltd. All rights reserved.
關聯:	POLYMER
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	396	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....