Micro-hole machining of carbide by electric discharge machining

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26930

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26930

題名:	Micro-hole machining of carbide by electric discharge machining
作者:	Yan,BH;Huang,FY;Chow,HM;Tsai,JY
貢獻者:	機械工程研究所
關鍵詞:	N/A
日期:	1999
上傳時間:	2010-06-29 18:03:32 (UTC+8)
出版者:	中央大學
摘要:	This paper describes the characteristics of the micro-hole of carbide by electric discharge machining with a copper tool electrode. Electric discharge machining (EDM) is a thermal process that utilizes a spark discharge to melt a conductive material, the tool electrode being almost non-unloaded, because there is no direct contact between the tool electrode and the workpiece. Therefore, the process works very efficiently, particularly in the machining of difficult-to-cut materials. This study takes advantage of these features to carry out the micro-hole machining of carbide with a copper tool electrode. To achieve minimal expansion of the machined micro-hole and minimal tool electrode wear rate to secure a high precision micro-hole in the carbide. the effects of changing the polarity, the tool electrode shape, and the rotational speed of the tool electrode are studied. The present experimental results show that positive polarity machining must be used. As for the rotational speed of the tool electrode, it is shown that a higher rotational speed electrode can minimize the expansion. In addition, it is demonstrated that the cross-sectional area of the tool electrode greatly affects the expansion and the tool electrode wear. Finally, removal of the debris discharge and reduction of expansion is shown to be improved remarkably by making a notch on the cylindrical cross-section. (C) 1999 Elsevier Science S.A. All rights reserved.
關聯:	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	473	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....