The machinability of KOVAR material

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26941

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26941

題名:	The machinability of KOVAR material
作者:	Huang,FY;Chow,HM;Chen,SL;Yan,KA
貢獻者:	機械工程研究所
關鍵詞:	N/A
日期:	1999
上傳時間:	2010-06-29 18:03:46 (UTC+8)
出版者:	中央大學
摘要:	In this paper, the machinability of round KOVAR bar in a lath, using four different cutting tools, i.e. P10, cemented carbide (with TiN coating), pure Al2O3, and AL(2)O(3) (with TIG) is studied. Experimental results on the machinability of these tools, including flank wear, cutting force, surface roughness of the workpiece, diffusion wear between the tool and the workpiece, and the BUE (built up edge) are obtained. The results show that P10 is the best cutting tool, whilst cemented carbide (TiN coating) is the worst cutting tool. By using a P10 cutting tool with high cutting speed (V greater than or equal to 200 m min(-1)), the smallest wear, best roughness, and smallest cutting force can be achieved. In contrast, due to high temperature, high cutting force, and high diffusion condition. the protective TiN-coating in the cemented carbide (with TiN coating) could be destroyed easily, resulting in aggravated fracture, and diffusion wear; making the cemented carbide (with TiN coating) unsuitable for the cutting of KOVAR material. The ceramic tools, on the other hand, are susceptible to micro-chipping, cracking, and welding wear due to separation of the BUE. The chips in the ceramic tools are found to tangle easily with the tools due to their long curing shapes. The performance of the ceramic tools, however, can be improved by alleviating chip problems. (C) 1999 Elsevier Science S.A. All rights reserved.
關聯:	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	506	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....