Size effect on thermal shock behavior of an alumina

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27008

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27008

题名:	Size effect on thermal shock behavior of an alumina
作者:	Lin,CK;Kuo,TC
贡献者:	機械工程研究所
关键词:	CERAMICS
日期:	1997
上传时间:	2010-06-29 18:05:25 (UTC+8)
出版者:	中央大學
摘要:	This study investigated the degradation in mechanical properties of an alumina subjected to thermal shock loading by systematic experiments on bend-bar specimens of two sizes, 3 x 4 x 45 mm and 9 x 12 x 15 mm, Thermal loading was applied by water-quench method with several well defined temperature differences. Critical temperature difference (Delta T-c) was defined as the lowest applied temperature difference above which a loss in flexure strength occurred. Delta T-c values for the large and small specimens were found to be 175 and 200 degrees C, respectively. The reduction in thermal shock resistance with increasing sample size can be well described by the thermal elastic and fracture energy theories. However, if the size effect on the initial, unshocked fracture strength is considered, the size effect on the transport of heat during quench test might play a less important role in reducing the thermal shock resistance of large specimen.
關聯:	JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	446	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing