STUDY ON THRESHOLD FATIGUE-CRACK GROWTH-CHARACTERISTICS OF ELECTRON-BEAM WELDING IN AISI 4130 STEEL

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27126

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27126

题名:	STUDY ON THRESHOLD FATIGUE-CRACK GROWTH-CHARACTERISTICS OF ELECTRON-BEAM WELDING IN AISI 4130 STEEL
作者:	HWANG,JR;CHANG,HH
贡献者:	機械工程學系
关键词:	STRESS-RATIO;MICROSTRUCTURE;BEHAVIOR
日期:	1993
上传时间:	2010-06-29 18:08:25 (UTC+8)
出版者:	中央大學
摘要:	Near-threshold fatigue crack growth of an electron beam weldment in AISI 4130 steel is studied. To increase the fatigue resistance ability, two different post-weld heat treatment processes are adopted to compare the near-threshold fatigue crack growth data with that of an as-welded specimen. The electron beam tempering in the vacuum chamber immediately after the welding and the traditional furnace tempering treatment are chosen for comparison. Strength of the welded joints is evaluated by a tensile test and near-threshold fatigue properties are investigated by K-decreasing method. The resistance to near-threshold fatigue crack growth is improved with post-weld heat treatment, due to the residual stress relief effect and existence of a toughened tempered structure. For electron beam post-weld heat treatment with 6 mm dot pattern width, the threshold stress intensity factor range increases by 14% compared to that of an as-welded specimen and the data of furnace post-weld heat treatment at 550-degrees-C can be improved by as much as 26%.
關聯:	ENGINEERING FRACTURE MECHANICS
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	452	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing