ELASTIC INTERACTION BETWEEN SCREW DISLOCATIONS AND A BLUNTING INTERFACIAL CRACK

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27149

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27149

题名:	ELASTIC INTERACTION BETWEEN SCREW DISLOCATIONS AND A BLUNTING INTERFACIAL CRACK
作者:	LEE,SL;HUANG,WS;SHIUE,ST
贡献者:	機械工程學系
关键词:	FREE ZONE MODEL;WELDED SURFACE CRACK;FRACTURE;DUCTILE;TIP
日期:	1991
上传时间:	2010-06-29 18:09:00 (UTC+8)
出版者:	中央大學
摘要:	Using the conformal mapping technique, the elastic interaction between a screw dislocation and an interfacial crack emanating from a semielliptic hole is investigated. We have derived the complex potential, the stress field, the strain energy, the force on the dislocation, the stress intensity factor at the crack tip, the critical stress intensity factor K(D) for dislocation emission and the critical stress intensity factor K(c) for brittle fracture. From the image force, we find that there are zero-force points near the surface of the semielliptic hole if the applied stress is sufficiently large. The ductile vs. brittle behaviour of two-phase material can be determined by the relative magnitudes of K(D) and K(c). A two-phase material with a larger shear modulus ratio and sharp crack will be more brittle. Finally, our results can be reduced to several special cases.
關聯:	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	437	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing