|
English
|
正體中文
|
简体中文
|
全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42690957
線上人數 : 1528
|
|
|
資料載入中.....
|
請使用永久網址來引用或連結此文件:
http://ir.lib.ncu.edu.tw/handle/987654321/27235
|
題名: | Plasma-Pretreated Catalyst for Methanol Synthesis From Syngas |
作者: | Lee,HM;Juan,LK;Yeh,FM;Li,HY;Chen,HL;Chang,MB;Chen,SH;Tzeng,CC |
貢獻者: | 環境工程研究所 |
關鍵詞: | DIELECTRIC-BARRIER DISCHARGE;NONTHERMAL PLASMA;TECHNOLOGIES;CU |
日期: | 2009 |
上傳時間: | 2010-06-29 18:20:53 (UTC+8) |
出版者: | 中央大學 |
摘要: | A new catalyst preparation method by combining the traditional coprecipitation method with an oxygen plasma pretreatment was developed in this paper. The ternary Cu/Zn/Al catalyst powders were first prepared by coprecipitation method, and then pretreated by the plasma in a fluidized-bed dielectric barrier discharge reactor with a carrier gas of a molar ratio of O-2/Ar = 5/95. Then, the plasma-pretreated catalyst was conducted with the methanol synthesis test at the following conditions: H-2/CO/N-2 = 64/32/4, Q = 900 sccm, P = 4 MPa, and T = 255 degrees C. The plasma pretreatment could enhance the catalytic activity, e. g., the methanol selectivity increased from 28% to 72% and the methanol yield from 0.19 to 0.52 g/g(cat). .h, although the CO and H-2 conversions were slightly decreased. On the other hand, the BET, inductively coupled plasma/optical emission spectroscopy, and X-ray diffraction analysis found that the catalytic properties did vary after plasma pretreatment. In short, this paper reveals that the plasma pretreatment is a viable process for preparation of Cu/Zn/Al catalyst in terms of methanol synthesis. |
關聯: | IEEE TRANSACTIONS ON PLASMA SCIENCE |
顯示於類別: | [環境工程研究所 ] 期刊論文
|
文件中的檔案:
檔案 |
描述 |
大小 | 格式 | 瀏覽次數 |
index.html | | 0Kb | HTML | 538 | 檢視/開啟 |
|
在NCUIR中所有的資料項目都受到原著作權保護.
|
::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::