中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/3228
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42709208      線上人數 : 1422
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/3228


    題名: 下水污泥焚化灰渣燒成輕質骨材特性之研究
    作者: 余岳峰;Yua-Fon Yu
    貢獻者: 環境工程研究所
    關鍵詞: 燒結;下水污泥焚化灰渣;輕質骨材;發泡;sintering;sewage sluddge ash;lightweight aggregate;bloating
    日期: 2000-07-05
    上傳時間: 2009-09-21 12:13:13 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 本研究利用國內北部兩不同處理流程之下水污泥焚化灰渣,改變其熱處理之溫度(1050℃-1150℃)、時間(10min-30min),及主成份(SiO2、Al2O3及Flux)比率進行燒結實驗,以探討其燒結特性、產生輕質化之機制,與適當之燒結控制條件。實驗中並藉SEM、XRD等分析技術,以了解試體微結構及晶相物之種變化。 實驗污泥灰中各主要重金屬(Pb、Cd、Cr、Cu、Zn)總量極低,其TCLP溶出濃度亦皆低於管制標準。實驗結果顯示,下水污泥灰之適當發泡溫度範圍約在1060-1090℃之間,主要受主成份特性之影響,經適當燒結溫度與時間之控制,所產生骨材可符合 CNS 常重骨材或輕質骨材之規範,輕質骨材密度可達低於1.6g/cm3之範圍。 在污泥灰調質實驗方面,以廢玻璃粉進調質,可增加其SiO2含量,降低玻璃相產生之熔點,促進玻璃相之形成,進而降低輕質化之溫度;而添加Al2O3則減緩發泡時間,但亦會增強試體之抗壓強度;另外添加少量垃圾焚化飛灰(5%),亦可降低發泡之溫度,但隨添加量增加,反而造成發泡溫度緩慢上升,顯示其雜質(Flux)中之物種對其發泡現象產生交互影響。 This study investigated the sintering characteristics of sewage sludge incinerator ash (SSIA) for porous lightweight aggregates, by heating the SSIA (from two different-processed sewage plants) under controlled conditions of varifying temperature (1050-1150℃), time (10-30 min.), and sludge ash components (SiO2, Al2O3, and flux). SEM and XRD techniques were used to examine the thermal treatment properties, including the bloating mechanism, microstructure, and speciation variation. The tested raw SSIA has considerably low contents and TCLP leaching concentrations for Pb, Zn, Cu, and Cr, all meeting the regulatory thresholds. The results indicate that the SSIA bloated well within 1060-1090℃, mainly characterized by its components, heating temperature and time. Properly controlled conditions could produce aggregates that meet CNS for common and lightweight standards. A lightweight density as low as 1.6 g/cm3 can be obtained. With respect to the modification of SSIA compositions, it was found that the addition of cullet increased the SiO2 content, lowering the melting point, and further the bloating temperature of the ISSA. On the other hand, the addition of Al2O3 delayed the bloating time but strengthened the compressive strength of the resultant aggregates. Moreover, the addition of small amount (5%) of MSW incinerator fly ash could lower the bloating temperature, whereas excess amount resulted in a slow but increasing bloating temperature, suggesting the interaction between the flux species in the ISSA.
    顯示於類別:[環境工程研究所 ] 博碩士論文

    文件中的檔案:

    檔案 大小格式瀏覽次數


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明