鄰近類別 研究計畫 [67/67] 期刊論文 [897/897] 考古題 [328/328] 類別統計 近3年內發表的文件: 343(11.83%) 含全文筆數: 2899(100.00%) 文件下載次數統計 下載大於0次: 2899(100.00%) 下載大於100次: 2429(83.79%) 檔案下載總次數: 1521115(73.69%) 最後更新時間: 2024-12-20 14:21 上傳排行 資料載入中..... 下載排行 資料載入中..... 最近上傳 一種簡易旋轉式LED曝光裝置的設計與實作 噴嘴外形對超音波輔助噴水效應之探討;Research on the E... 磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on... 微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In... 陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran... 鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc... 混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ... 液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li... 以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp... 基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

跳至: (選擇年份) 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (選擇月份) January February March April May June July August September October November December 或輸入年份:

由新到舊排序 由最舊的開始

顯示項目951-1000 / 2899. (共58頁) << < 15 16 17 18 19 20 21 22 23 24 > >> 每頁顯示[10|25|50]項目

日期	題名	作者
2016-08-02	CAD實體模型之整體與局部圓角簡化技術發展;Development of Overall/Local Fillets Simplification Algorithm for CAD Model	林子傑; Lin,Tzu-Chieh
2016-08-01	B-rep模型之刻字特徵辨識技術發展	黃維彬; Huang,Wei-Bin
2016-08-01	B-rep模型肋特徵辨識及混合式實體網格建構研究	游詒琇; Yu,Yi-Hsiu
2016-08-01	CAD模型之Fillet與Boss混合式實體網格建構研究	林子勤; Lin,Zih-Chin
2016-07-29	影像引導電化學線放電加工石英玻璃之研究	張庭瑞; Chang,Ting-Jui
2016-07-28	探討不同結晶率對鋯鋁鈷塊狀非晶質合金機械性質之影響;Study on the Mechanical and Corrosion Properties of the Partial Crystallized Zr54Al17Co29 Bulk Metallic Glass	羅彥達; Pradana,Yanuar Rohmat Aji
2016-07-28	模糊系統H∞靜態輸出回授控制器設計─齊次多項式尤拉法;H∞ Static Output Feedback Controller Design of Fuzzy Systems Via Homogeneous Euler′s Method	劉鎔維; Liu,Jung-Wei
2016-07-27	大型風力機塔架之應力分析	王帥幃; Wang,Shuai-Wei
2016-07-27	不同氣體負載下雙螺桿壓縮機動力響應及振動頻譜特徵之預測;Prediction of Dynamic Responses and Vibration Spectrum Characteristics for a Twin-screw Compressor under Different Gas-induced Loads	許博華; Hsu,Po-Hua
2016-07-27	基於反渦旋流體注入油膜軸承其影響因子及消除流體引發不穩定之研究;Investigation on Influential Factors and the Elimination of Fluid-Induced Instability Based on Anti-swirl Injection in Fluid-Film Bearings	黎大都; DO,LE DUC
2016-07-27	軸變形影響下之修整型螺旋齒輪對接觸特性探討	邱雅靖; Chou,Ya-Ching
2016-07-27	新型魯氏真空泵轉子齒形之參數化設計及性能評估;Parameterization Design and Performance Evaluation of a Novel Rotor Profile for Roots Vacuum Pumps	鍾克育; Jhong,Ke-Yu
2016-07-26	發光二極體效率降低的數值研究;Numerical Investigation of Effciency Droop in Light-Emitting Diodes	吳輝昕; Thinh,Vo Huy
2016-07-25	光電化學效應抑制P-型多孔矽形成之研究;The Inhibition of P-type Porous Silicon Formation by Photo- electrochemistry	江昭慶; Chiang,Chao- Ching
2016-07-25	氧化亞銅奈米粉末之室溫化學合成研究及其水分解之光電化學特性;Room temperature chemical synthesis of Cu2O nanopowders and their application to Photoelectrochemical water splitting	張凱閔; ZHANG,KAI-MIN
2016-07-25	高速火焰熔射製備鐵基非晶質合金塗層及其耐磨耗性與抗腐蝕性之研究;The Study of Wear and Corrosion Resistance of Fe-Based Metallic Glass Coating Prepared by HVOF Thermal Spray	林大新; Lin,Ta-Hsin
2016-07-22	Cr-Electrodepostion influenced by cations and anions added in the Cr(III)-containing bath	阮帆泰; Tai,Nguyen Van
2016-07-22	冷卻速率、塑性變形與固溶溫度對SP-700鈦合金微結構與機械性質之影響;Effect of cooling rate, plastic deformation and solution temperature on microstructure and mechanical properties of SP-700 titanium alloys	聶若光; Nieh,Jo-Kuang
2016-07-22	超塑成形工件製造分析及燃料電池釩電池微感測器;Superplastic forming analysis and micro sensor for fuel cells and vanadium battery	陳嘉鴻; Chen,Chia-Hung
2016-07-22	微量鈹與鈧對Al-7Si-0.6Mg合金:微結構、熱穩定性、與淬火敏感性之影響;Effect of trace Be and Sc on microstructure, thermal stability, and quench sensitivity of Al-7Si-0.6Mg alloys	曾有志; Tzeng,Yu-Chih
2016-07-21	微量鈹、鋯與鈧對Al-7Si-0.6Mg合金 腐蝕與磨耗性質之影響;Effect of minor Be, Zr, and Sc on the corrosion and sliding wear properties of Al-7Si-0.6Mg alloys	曾怡榮; Teng,Yi-Rong
2016-07-20	錳對Al-13.9wt.%Mg2Si複合材料微結構與磨耗性質之影響;Effect of Mn on the Microstructure and Wear Properties of Al-13.9wt.%Mg2Si Composites	吳昆達; Wu,Kun-Da
2016-07-19	雙陽極即時影像微電鍍控制之研究;Real-time image feedback control for dual-anode local electrochemical deposition system	游輝邦; You,Hui-Pang
2016-07-18	以CaTiO3應用於鈣鈦礦太陽能電池電子傳輸層之研究;The Study of Perovskite Solar Cells by Using Calcium Titanate as Electrical Transfer Layer	林育葳; Lin,Yu-Wei
2016-07-12	移動刀具之遮罩式微電化學加工模擬與分析;Modeling and Analysis of Through-mask Electrochemical Micro-machining with a Moving Tool	陳千蕙; Chen,Chien-Hui
2016-07-12	鍍膜提升手工電纜鉗銳利度與耐磨耗性研究;Wear behavior and cutting performance of PVD TiN, TiCN, TiAlN, TiAlCrN/TiAlN and TiN/TiAlN/TiAlCN coated wire strippers	陳建安; Chen,Chien-An
2016-07-11	結合石墨烯之混能式(壓電、靜電)穿戴 形變感測器與智慧型玻璃應用;A Self-Powered Sensor with a hybridization of transparent and Stretchable graphene-piezoelectric-Triboelectric synergetic structures for applications of Smart Window and human motion detection	李尚謙; Li,Shan-Chien
2016-07-06	以石蠟/奈米石墨片相變化材料提升IGBT熱管理;Paraffin / graphite nanoplatelet composite phase change material for the enhancement of IGBT thermal management	彭雅琪; Peng,Ya-Chi
2016-07-06	以數值模擬與實驗驗證研究 精密深溝滾珠軸承多道次溫間鍛造製程 -缺陷分析與模具設計合理化;Numerical analysis and experimental validation on multi- stage warm forging process of deep groove ball bearing --- defect analysis and tooling design rationalizationNumerical analysis and experimental validation on multi- stage warm forging process of deep groove ball bearing --- defect analysis and tooling design rationalization	黃傑泓; Huang,Jie-Hong
2016-07-06	石墨烯與奈米石墨嵌入式熱介面材料與散熱應用;Graphene and Nanographite Embedded Composites as Thermal Interface Materials For Heat Dissipation Applications	李睿中; Lee,Rui-Zhong
2016-07-06	利用遮罩式電化學加工製作穿孔之最佳化參數分析;The Optimal Parametric Analysis in Fabrication of through hole by Through Mask Electrochemical Machining	黃暐倫; Huang,Wei-Lun
2016-07-06	專為妥瑞症患者聲語型抽動設計之減音口罩;Sound suppression mask specifically designed for minimizing tics impulse acoustics of Tourette’s patients	陳泓瑜; Chen,Hung-Yu
2016-07-06	常用金屬材料在硝酸鈉與氯化鈉電解液中電化學加工特性之探討;The Investigation of Electrochemical Machining Characteristics for Common Metallic Materials in NaNO3 and NaCl Electrolytes	趙冠瑋; Chao,Guan-Wei
2016-07-01	三維集成電路的發展與挑戰;The Development and Challenges of 3D IC	李牧民; Lee,Mu-Ming
2016-07-01	矽晶圓濕式去光阻技術的過去發展與現況	劉錡; Liu,Chi
2016-06-30	鎂鋁合金電極研製及其產氫效益之研究;Study on the preparation of Mg-Al alloy electrodes and their applications in efficiency improvement of hydrogen production	許,文 濃; Hsu,Wen-Nong
2016-06-24	Analysis of Proton Conducting Solid Oxide Fuel Cell Hybrid Systems with Anode and Cathode Recycling	柯莫; Sasmoko
2016-06-21	鋁合金6061-T6鎢極惰性氣體保護銲與真空硬銲接頭之疲勞壽命評估研究;Fatigue Assessment of 6061-T6 Aluminium Alloy Joints Processed by Tungsten Inert Gas Welding and Vacuum Brazing	林暉; Lin,Huei
2016-06-17	應用表面微結構沉積銀顆粒輔助製作矽奈米線之研究;Study of assist fabricating Silicon nano wire by depositing silver particle on surface microstructure	鍾政毅; Cheng,Cung-Yi
2016-06-16	以臭氧電漿活化表面強化異質晶圓鍵合之研究;Improving wafer bonding of dissimilar materials by ozone plasma activated surface	胡惠欽; Hu,Hui-Chin
2016-06-16	奈米銀沉澱-蝕刻二段式製作陣列矽奈米線之研究;The study of fabricating silicon nanowire arrays with nano-sliver particle and two-step method	黃以鈞; Huang,Yi-Chun
2016-06-15	應用銅顆粒輔助蝕刻製作矽奈米蟲洞似通道之研究;Fabricate nano worm-like tunnel of silicon by copper particals assisted etching	何承隆; Ho,Cheng-Long
2016-06-01	超塑成形工法設計及求證以製作民航客機之機翼前緣整流罩	唐榕崧; Tang,Jung-Sung
2016-02-26	三維近紅外光擴散光學斷層影像重建之數值計算研究	嚴中成; Yan,Chung-chen
2016-02-24	粉末冶金螺旋齒輪模具設計與驗證;The Design and Verification of Helical Gear Mold by Powder Metallurgy	賴柏方; Lai,Po-Fang
2016-01-27	地面物體搜索用無線網路的開發	洪茂修; Hung,Mao-Hsiu
2016-01-27	利用白金奈米粒子製備多孔矽結構梯度表面之潤濕性研究	陳宏哲; Chen,Hung-zhe
2016-01-27	迴轉式壓縮機熱流模擬分析;Numerical Analysis of Thermal Flow for Rotary Compressors	方鎮豪; Fang,Jhen-Hao
2016-01-26	6061-T6鋁合金惰性氣體鎢極電弧銲接件與真空硬銲件之疲勞裂縫成長性質研究	郭峻瑋; Guo,Jun-wei
2016-01-26	Performance characteristic modeling of hybrid proton conducting solid oxide fuel cell (pSOFC) and micro gas turbine (MGT) system using a double bypass valve for heat management;Performance characteristic modeling of hybrid proton conducting solid oxide fuel cell (pSOFC) and micro gas turbine (MGT) system using a double bypass valve for heat management	尤卞藤; Pranoto,Bayu

顯示項目951-1000 / 2899. (共58頁) << < 15 16 17 18 19 20 21 22 23 24 > >> 每頁顯示[10|25|50]項目