超音波振動補助引伸加工之有限元素分析; The finite-element analysis of deep drawing assisted with ultrasonic vibration

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > Electronic Thesis & Dissertation > Item 987654321/43550

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/43550

Title:	超音波振動補助引伸加工之有限元素分析;The finite-element analysis of deep drawing assisted with ultrasonic vibration
Authors:	陳俊賢;Jun-Xian Chen
Contributors:	機械工程研究所
Keywords:	超音波振動;引伸加工;有限元素;ultrasonic vibration;deep drawing;finite-element
Date:	2010-07-21
Issue Date:	2010-12-08 13:44:26 (UTC+8)
Publisher:	國立中央大學
Abstract:	本文應用 MARC 有限元素套裝軟體分析超音波輔助引伸加工問題。為瞭解 MARC 應用於引伸問題的預測性及妥適性，本文首先利用引伸的實驗結果比較模擬的準確性，並分別探討成品厚度、成形所需之沖頭負載及材料成形性的影響。利用母模加載超音波振動來輔助引伸成形，其振動方向分別為平行與垂直沖頭運動方向，進而探討超音波振動輔助引伸成形之影響。 The paper employs MARC software to analyze the behavior of deep drawing assisted by ultrasonic vibration. To understand the abilities of MARC in the prediction and suitability of the behavior in deep drawing, compared with experimental results are applied firstly. Thickness, drawing load and material behavior are separately discussed. Upper die with ultrasonic vibration which direction is parallel and vertical to the moving stroke assists in deep drawing. Finally, the paper investigates the influence of deep drawing with ultrasonic vibration.
Appears in Collections:	[Graduate Institute of Mechanical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	554	View/Open

社群 sharing

Loading...