中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/46354
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 80990/80990 (100%)
Visitors : 42693640      Online Users : 1431
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/46354


    Title: 應用機器視覺搭配類神經網路對CCD sensor作影像對位之研究;Application of machine vision with neural network to alignment for CCD sensor
    Authors: 許得政;Hsu Te Cheng
    Contributors: 機械工程研究所碩士在職專班
    Keywords: 機器視覺;影像處理;類神經網路;Machine Vision;Image processing;ANN
    Date: 2010-11-04
    Issue Date: 2011-06-04 15:02:10 (UTC+8)
    Publisher: 國立中央大學
    Abstract: 一個好的光學成像系統必須建立在沒有像差的基準上,而會造成像差的原因有許多種,其中最常發生的原因是無法對焦於同一光軸上的任一點,各相機系統廠為解決此項問題大多利用雷射準直儀,作為鏡片及CCD Sensor的平行對位校正,但此類型的設備較為昂貴。 目前機器視覺的技術已發展成熟,廣泛的應用在各產業界中,其中不乏使用在對位技術方面,本研究係經由影像切割將背景與檢測樣本作區分後,在進行行距間的量測判定,利用兩組CCD分別架設於機台的上側與前側,計算出樣本XYZ軸的平行度與間距是否與設計值相同,並透過類神經網路的學習過程,將判定的準確率接近至百分之百,使其數位相機的像差問題,可獲得有效的改善。 A good optical imaging system must be established benchmarks in the absence of aberration ,The reasons can cause many types of aberration ,which is the most common reason for not focusing on any point on the same optical axis ,The ODM(Own Designing & Manufacturing) factory of DSC(Digital Still Camera) to solve the problem mostly use the laser on the favorite ,as the lens and the CCD Sensor parallel alignment correction ,However ,this type of equipment is more expensive. Currently ,machine vision technology has been developed ,Widely application in all works of life and always can be find in technology of location alignment ,This paper is research how to measurement space ,after Image segmentation to distinguish between background and test samples ,using two CCD and set up at the working platforms top side and front side ,Calculate the Parallelism and spacing of sample XYZ axis is same or not with the design value ,through the learning process of Artificial neural network ,let error rate will be close to design values as low as ,and aberrations problem of digital camera could be improved.
    Appears in Collections:[Executive Master of Mechanical Engineering] Electronic Thesis & Dissertation

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML1273View/Open


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明