超音波振動對引伸加工效應之有限元素分析; The finite element analysis of deep drawing process by superimposing ultrasonic vibrations.

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > Electronic Thesis & Dissertation > Item 987654321/47684

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/47684

Title:	超音波振動對引伸加工效應之有限元素分析;The finite element analysis of deep drawing process by superimposing ultrasonic vibrations.
Authors:	林建呈;Jian-Cheng Lin
Contributors:	機械工程研究所
Keywords:	超音波振動;引伸;粗糙度;roughness;deep drawing;ultrasonic vibration
Date:	2011-07-23
Issue Date:	2012-01-05 12:31:25 (UTC+8)
Abstract:	本文應用有限元套裝軟體MARC分析超音波輔助引伸加工問題。為瞭解MARC軟體應用於引伸加工研究的預測性及適妥性，本文首先利用引伸加工實驗結果比較模擬結果的準確性，並於料片建立粗糙度模型，分別探討成品表面粗糙度狀況、成形所需之沖頭負載以及表面粗糙度狀況對成形力的影響。並於母模加載徑向超音波振動，進而探討超音波震動輔助引伸成形的影響。 The paper employs MARC software to analyze the behavior of deep drawing assisted by ultrasonic vibration. To understand the abilities of MARC in the prediction and suitability of the behavior in deep drawing, compared with experimental results are applied firstly. Building the roughness model on the outside surface of blanks and discussed the finished situation of surface roughness, the required punch load and the influence of forming load by surface roughness condition. Investigating the influence of forming load by ultrasonic vibration-assisted forming with radial ultrasonic vibration on upper die.
Appears in Collections:	[Graduate Institute of Mechanical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	575	View/Open

社群 sharing

Loading...