全通網路相位偏移器之設計與製作; Design and Fabrication of Phase Shifters Based on All-Pass Networks

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Electrical Engineering > Electronic Thesis & Dissertation > Item 987654321/48622

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/48622

Title:	全通網路相位偏移器之設計與製作;Design and Fabrication of Phase Shifters Based on All-Pass Networks
Authors:	陳偉志;Wei-Chih Chen
Contributors:	電機工程研究所
Keywords:	可變電容;鐵電材料;相位偏移器;全通網路;Varactor;Ferroelectric;Phase Shifter;All-Pass Network
Date:	2011-10-05
Issue Date:	2012-01-05 14:59:47 (UTC+8)
Abstract:	本論文使用全通網路架構作為基礎來實現數位式與類比式相位偏移器。在第二章中，我們推導出數位式全通網路相位偏移器的設計公式，並成功地使用穩懋0.15-μm砷化鎵假性高速電子移動場效電晶體製程實現一5.8 GHz 90°相位偏移器晶片。其在設計頻率5.8 GHz 下的量測結果顯示，當電晶體在開與關的狀態下（電晶體閘極偏壓分別為0 V 與−2 V），其插入損耗分別小於1.9 dB 與0.8 dB，而輸入與輸出返回損耗則大於15 dB，相位偏移量可達88°，與設計目標90°相當接近。第三章中我們分析了類比式全通網路相位偏移器，並推導出其設計公式。而為了實現類比式的相位偏移器，我們發展了鐵電可變電容製程。鐵電可變電容中的鐵電薄膜是使用脈衝雷射沉積技術來製作。製作出的可變電容在4 V 偏壓下可達到2:1 的可調度，其於1.8 GHz 時的品質因子大於40。 In this thesis, digital and analog phase shifters are designed based on all-pass networks. In Chapter 2, the design equations for digital all-pass phase shifters are derived. Based on the equations, we successfully implement a 5.8-GHz 90°digital phase shifter chip using WIN 0.15-μm GaAs pHEMT process. The measurement results at 5.8 GHz show that, when the switch is switched to ON and OFF-states (gate terminals of the transistors are biased at 0 V and −2 V, respectively), the insertion loss of the circuit is less than 1.9 dB and 0.8 dB, respectively, and both the input and output return losses are greater 15 dB. The measured phase shift is 88°, which is close to the target phase shift of 90°. In Chapter 3, we analyze analog phase shifters based on all-pass networks, and derive the design equations. In order to implement the analog phase shifter, we develop ferroelectric variable capacitor (varactor) process. The ferroelectric thin films used in the varactors are fabricated using pulsed laser deposition (PLD) technique. The fabricated ferroelectric varactors can achieve a 2:1 tunability under a bias voltage of 4 V, and possess a quality factor greater 40 at 1.8 GHz.
Appears in Collections:	[Graduate Institute of Electrical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	588	View/Open

社群 sharing

Loading...