Fabrication and Measurement Uncertainty Evaluation for Polystyrene Nanoparticle Standards

NCU Institutional Repository > 工學院 > 化學工程與材料工程學系 > 期刊論文 > Item 987654321/49858

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/49858

题名:	Fabrication and Measurement Uncertainty Evaluation for Polystyrene Nanoparticle Standards
作者:	Chen,CJ;Lin,CM;Yu,TC;Weng,HF;Chen,H;Liu,YY
贡献者:	化學工程與材料工程學系
关键词:	POLYMERIZATION;MICROSPHERES
日期:	2010
上传时间:	2012-03-27 16:24:51 (UTC+8)
出版者:	國立中央大學
摘要:	This paper describes the fabrication, size measurement, and uncertainty evaluation for the monodisperse polystyrene latex (PSL) particles with nominal sizes of 100 nm, 300 nm, and 500 nm using the homemade electro-gravitational aerosol balance (EAB) method. In the measurement system, charged particles are classfied by the Differential Mobility Analyzer and introduced the single charged particles into the space between horizontally placed planar electrodes. The evaluation of the number of survived particles after a period of settling time can lead to determine the particle mass according to the balance between the electrostatic and gravitational forces exerted on the charged particles. And the particle size is calculated with a known density. The main contributed error sources of measurement uncertainty by EAB are survival rate curve fitting and producibility. The measurement results of homemade PSL particles are 109.0 nm +/- 1.2 nm, 284.4 nm +/- 0.92 nm and 529.4 nm +/- 1.3 nm, respectively.
關聯:	JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS
显示于类别:	[化學工程與材料工程學系 ] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	475	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing