A cutter tool monitoring in machining process using Hilbert-Huang transform

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50030

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50030

题名:	A cutter tool monitoring in machining process using Hilbert-Huang transform
作者:	Kalvoda,T;Hwang,YR
贡献者:	機械工程學系
日期:	2010
上传时间:	2012-03-27 17:01:32 (UTC+8)
出版者:	國立中央大學
摘要:	This paper presents the use of accelerometer signals in order to detect cutter tool wear and tool fault under different cutting conditions. The new method, Hilbert-Huang transform (HHT), was applied to the cutter tool wear and tool fault monitoring and compared to Fourier transform. In the results processed by short-time Fourier transform the cutter tool wear or tool fault is detected by increasing the power in the power spectral density. The acceleration signals (processed by using HHT) change the frequency in the marginal spectra as a result of geometric change of the cutter tool. Results are presented in both frequency domain and time-frequency domain in the case of HHT. The HHT presents data locally without harmonics. This fact permits overcoming of the nonlinearity and nonstationarity of the acceleration signal. Axes x and z are the most sensitive to both HHT and Fourier transform. (C) 2010 Elsevier Ltd. All rights reserved.
關聯:	INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	387	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing