Plasticity enhancement of Mg(58)Cu(28.5)Gd(11)Ag(2.5) based bulk metallic glass composites dispersion strengthened by Ti particles

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50138

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50138

题名:	Plasticity enhancement of Mg(58)Cu(28.5)Gd(11)Ag(2.5) based bulk metallic glass composites dispersion strengthened by Ti particles
作者:	Jang,JSC;Chang,YS;Li,TH;Hsieh,PJ;Huang,JC;Tsao,CYA
贡献者:	機械工程學系
关键词:	MECHANICAL-PROPERTIES;THERMAL-STABILITY;MATRIX COMPOSITES;AMORPHOUS-ALLOYS
日期:	2010
上传时间:	2012-03-27 17:04:19 (UTC+8)
出版者:	國立中央大學
摘要:	We have successfully synthesized the Ti particles reinforced Mg(58)Cu(28.5)Gd(11)Ag(2.5) metallic glass composites (BMGCs) rods with a diameter of 2-4 mm by injection casting method in an Ar atmosphere. The glass forming ability (GFA) and the mechanical properties of these Mg-based BMGCs have been systematically investigated as a function of volume fraction (V(f)) of Ti particles. The results show that the compressive plasticity increases with the volume fraction of Ti particles. A drastic improvement of compressive plastic strain (reach up to 24%) occurs at the Mg-based BMGC with 40 vol.% Ti particles. In parallel, multiple shear bands were revealed on the sample surface after compression test. This suggests that these dispersed Ti particles can highly absorb the energy of shear banding and branch the primary shear band into multiple shear bands, thus decrease the stress concentration for further propagation of shear band and so as to significantly enhance plasticity. Additionally, the yield strength can be kept at 800MPa as increasing the addition of Ti particles to 40 vol.%. This was found presumably due to the good bonding of interface between the Ti particle and amorphous matrix. (C) 2010 Elsevier B.V. All rights reserved.
關聯:	JOURNAL OF ALLOYS AND COMPOUNDS
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	331	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....