English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42718132      線上人數 : 1317
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50523


    題名: Integrating borehole-breakout dimensions, strength criteria, and leak-off test results, to constrain the state of stress across the Chelungpu Fault, Taiwan
    作者: Haimson,B;Lin,WR;Oku,H;Hung,JH;Song,SR
    貢獻者: 地球物理研究所
    日期: 2010
    上傳時間: 2012-03-27 17:36:06 (UTC+8)
    出版者: 國立中央大學
    摘要: The paper describes the computation of the maximum horizontal stress (sigma(H)) magnitude in the vicinity of the Chelungpu Fault, Taiwan, host of the slip zone during the Chi-Chi earthquake (M(w) 7.6; 1999). The scientific hole B intercepts the Chelungpu Fault at 1136 m. At the depths of logged breakouts (940-1310 m), the vertical stress (sigma(v)) as estimated from density logs increases linearly with depth from 22 to 31 MPa. A series of leak-off tests yielded two reliable shut-in pressures, 23.7 MPa at 1085 m and 29.8 MPa at 1279 m, which are lower than the estimated sigma(v), albeit by only 2.1 and 0.6 MPa, respectively. In our analysis the shut-in pressures were considered to represent estimates of the least horizontal principal stresses (sigma(h)) at the respective depths, and consequently the test-induced fractures were assumed to have been vertical. Principal stress directions had been previously determined by others (105 degrees-155 degrees for the maximum horizontal stress, sigma(H), except in the immediate vicinity of the Chelungpu Fault). The contribution of this paper is the estimation of the sigma(H) magnitude by considering that the state of stress at the points of intersection between breakout and borehole wall is in a state of limit equilibrium with the true triaxial strength criterion. The resulting sigma(H) in the range of logged breakouts increases with depth from 55 MPa at 940 m to 59 MPa at 1310 m. Thus, the estimated state of stress prevailing across the Chelungpu Fault is compatible with strike-slip, but marginally also with thrust faulting. However, the likelihood that the shut-in pressures actually represent sigma(v) magnitudes, and that the leak-off test-induced fractures were sub-horizontal, cannot be ignored. In that case the state of stress would clearly favor thrust faulting. (C) 2009 Elsevier B.V. All rights reserved.
    關聯: TECTONOPHYSICS
    顯示於類別:[地球物理研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML470檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明