Efficient Gel-Type Electrolyte with Bismaleimide via In Situ Low Temperature Polymerization in Dye-Sensitized Solar Cells

NCU Institutional Repository > 理學院 > 化學學系 > 期刊論文 > Item 987654321/50697

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50697

题名:	Efficient Gel-Type Electrolyte with Bismaleimide via In Situ Low Temperature Polymerization in Dye-Sensitized Solar Cells
作者:	Chen,JG;Liu,KY;Chen,CY;Lin,CY;Huang,KC;Lai,YH;Wu,CG;Lin,KF;Ho,KC
贡献者:	化學學系
关键词:	PLASTIC-CRYSTAL ELECTROLYTE;CROSS-LINKED GEL;COMPOSITE ELECTROLYTE;LIQUID ELECTROLYTES;PERFORMANCE;ENHANCEMENT;PRECURSORS;CONVERSION;MECHANISM;SYSTEMS
日期:	2010
上传时间:	2012-03-27 18:08:09 (UTC+8)
出版者:	國立中央大學
摘要:	This study reports the characteristics of gel-type dye-sensitized solar cells (DSSCs), fabricated with gel-type electrolyte containing poly-1,1'-(methylenedi-4,1-phenylene) bismaleimide (PBMI), or poly-1,1'-(3,3'-dimethyl- 1,10-biphenyl-4,4'-diyl) bismaleimide (PDBBMI), or poly-N,N'-(4-methyl-1,3-phenylene)bismaleimide (PMPBMI), prepared by in situ polymerization of the corresponding monomer without an initiator at 30 degrees C. Incorporating 0.3 wt % content of exfoliated alkyl-modified nanomica (EAMNM) into PBMI-gelled electrolyte leads to higher short-circuit current density (J(sc) = 17.14 mA cm(-2)) and efficiency (eta = 7.02%) than that of neat PBMI-gel electrolyte (J(sc) = 15.32 mA cm(-2), eta = 6.41%). Incorporating 0.3 wt % EAMNM into PBMI-gelled electrolyte results in remarkably stable device performance under continuous light soaking under one sun (100 mW cm(-2)) at 55 degrees C. The efficiency of DSSCs based on PBMI/0.3 wt % EAMNM-gelled electrolyte drops by only 1.7% (eta = 6.93%) after 500 h of continuous light soaking. (C) 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4950-4957, 2010
關聯:	JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
显示于类别:	[化學學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	493	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....