In Situ STM of 3-Mercaptopropanesulfonate Adsorbed on Pt(111) Electrode and Its Effect on the Electrodeposition of Copper

NCU Institutional Repository > 理學院 > 化學學系 > 期刊論文 > Item 987654321/50736

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50736

題名:	In Situ STM of 3-Mercaptopropanesulfonate Adsorbed on Pt(111) Electrode and Its Effect on the Electrodeposition of Copper
作者:	Tu,HL;Yen,PY;Wu,HL;Chen,S;Vogel,W;Yau,S;Dow,WP
貢獻者:	化學學系
日期:	2010
上傳時間:	2012-03-27 18:09:00 (UTC+8)
出版者:	國立中央大學
摘要:	The adsorption of 3-mercaptopropanesulfonate (MPS) molecule on a Pt(111) single-crystal electrode and its effect on the deposition of Cu have been examined using in situ scanning tunneling microscopy (STM). MPS admolecules were irreversibly adsorbed in a largely disordered adlayer on bare Pt(111) in 0.1 M HClO(4), irrespective of the presence of chloride, the concentration of MPS, and the applied potential. In comparison, the MPS admolecules readily formed a highly ordered molecular structure identified as (4x2 root 3)rect on Pt(111) precoated with a monolayer of Cu adatoms. The MPS admolecules were adsorbed upright on Pt(111). The cyclic voltammetric results show that the MPS adlayer on Pt(111) would inhibit Cu deposition because the addition of 10 mu M MPS to the electrolyte of 0.1 M HClO(4)+1 mM KCl+1 mM Cu(ClO(4))(2) reduced the amount of the Cu deposit by half, even in the presence of chloride. The texture of the Cu deposit also varied with the surface state of the Pt(111) electrode as the Cu film grew in three-dimensional islands and smooth flakelike morphology on the MPS-modified and Cu-coated Pt(111) electrodes, respectively. In situ STM results indicated that the MPS admolecules stayed afloat rather than buried by the Cu deposit.
關聯:	JOURNAL OF THE ELECTROCHEMICAL SOCIETY
顯示於類別:	[化學學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	461	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....