中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/50927
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 42695159      在线人数 : 1516
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50927


    题名: Sensitivity Enhancement for Quantitative Electrochemical Determination of a Trace Amount of Accelerator in Copper Plating Solutions
    作者: Chiu,YD;Dow,WP;Huang,SM;Yau,SL;Lee,YL
    贡献者: 化學學系
    关键词: SELF-ASSEMBLED MONOLAYERS;VOLTAMMETRIC STRIPPING ANALYSIS;POLYETHYLENE-GLYCOL;CHLORIDE-ION;DISULFIDE ADSORPTION;CU ELECTRODEPOSITION;ORGANIC ADDITIVES;ASPECT-RATIO;SEED LAYER;ACID
    日期: 2011
    上传时间: 2012-03-27 18:13:04 (UTC+8)
    出版者: 國立中央大學
    摘要: An accelerator is an indispensable organic additive for the bottom-up filling of copper electroplating in nano-or micro-scale features. However, its effective concentration is too low to be easily determined and controlled. Herein, a new electrochemical analysis method based on self-assembly monolayers of thiol molecules on a gold electrode was developed to accurately determine a trace amount of accelerator. The accelerator employed in copper plating solutions is bis-(3-sulfopropyl) disulfide (SPS), which is the most common accelerator for the filling of vias and trenches of interconnects. The SPS concentration in copper plating solutions ranged from 0.3 to 9.0 ppm. Following selective chemisorption of SPS onto the gold electrode, the SPS-modified gold electrode was transferred into a specific electrolyte composed of CuSO(4), H(2)SO(4), polyethylene glycol and chloride ions to run cyclic voltammetry (CV) for copper deposition and stripping. A specific peak current of copper reduction formed in the CV, and its peak area depended on the SPS concentration in the copper plating solution. A good linear calibration line was obtained by using this electrochemical analysis method, which can determine a trace amount of SPS in a concentration range of 0.3-1.0 ppm, which is a significant challenge for traditional instruments. (C) 2011 The Electrochemical Society. [DOI: 10.1149/1.3560479] All rights reserved.
    關聯: JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    显示于类别:[化學學系] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML463检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明