以自我複製技術設計及製作低損耗型波導;Design and fabrication of Low Propagation Loss Waveguide Using Autocloning Technique

NCU Institutional Repository > 理學院 > 光電科學研究所 > 博碩士論文 > Item 987654321/53155

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/53155

题名:	以自我複製技術設計及製作低損耗型波導;Design and fabrication of Low Propagation Loss Waveguide Using Autocloning Technique
作者:	陳映羽;Ying-Yu Chen
贡献者:	光電科學研究所
关键词:	光子晶體;低損耗;波導;自我複製技術;Waveguide;Low Propagation Loss;Autocloning;photonic crystal
日期:	2012-04-23
上传时间:	2012-06-15 20:12:31 (UTC+8)
摘要:	本論文主要以自我複製技術(Autocloning technique)來製作微型化波導，並藉由有限時域差分法(Finite-Difference Time-Domain; FDTD) 來設計微型化波導以及利用電子束直寫技術製作所需的基板圖樣。首先，使用有限時域差分法模擬自我複製型波導的堆疊方式，比較非對稱膜堆與對稱膜堆、SiO2/Ta2O5與SiO2/TiO2結構、各種週期大小、不同頂角下TE偏振各入射角度傳遞效率的優劣，與文獻中自我複製型波導傳遞效率相比，傳遞損耗下降幅度達76.4%。此外也探討結構核心層及包覆層之等效折射率與各項參數間的相關性。在製程過程中，利用電子槍蒸鍍系統與離子源助鍍製作自我複製式波導，共37層，其厚度約為9.2 μm。在波長1520 nm~1570 nm，其傳遞損耗為0.1838dB/mm，可應用於通訊紅外光區塊，自我複製技術有著可大量生產且多層製作之特性，微型化波導則有著積體化的前瞻性，未來可望商業化應用於積體平面光路。In this research, we design and fabrication low propagation loss waveguide using by Autocloning technique. Simulation the design using by Finite-Difference Time-Domain method. Comparison of several structures, such as difference accumulation type, lattice constant, vertex angle, thickness, transverse period, and two kind of heterostructure Ta2O5/SiO2 and TiO2/SiO2, which structure can reduce the Autocloned waveguide propagation loss. In addition, we comparing the equivalent refractive index between several structures, which has the lower propagation loss and its core and cladding actually has more difference equivalent refractive index. As the result of our design, propagation loss is reduce by over 76.4% compared with the literature. And we have fabricated the Autocloned waveguide using electron beam gun evaporation with ion-beam-assisted depositon (IAD) successfully. The structure thin film has 37 layers, which physical thickness was 9.2μm. The Autocloned waveguide had low propagation loss about 0.1838dB/mm at 1520-1570 nm in infrared region. Autocloning technology can be mass production, and multi-layer stack is characteristics of Autocloning technology. Integrated and miniaturization of Autocloned waveguide is forward-looking. In the future, Autocloned integrated waveguide can expected to commercial application.
显示于类别:	[光電科學研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	724	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....