應用福特8D法改善離子植入機設備效能探討─以A公司為例;none

NCU Institutional Repository > 管理學院 > 高階主管企管（EMBA）碩士班 > 博碩士論文 > Item 987654321/55003

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/55003

题名:	應用福特8D法改善離子植入機設備效能探討─以A公司為例;none
作者:	林欽聰;Lin,Chin-tsung
贡献者:	管理學院高階主管企管碩士班
关键词:	離子植入機;福特8D;半導體產業;晶圓代工;ion implanter;Ford 8D;semiconductor industry;foundry
日期:	2012-06-23
上传时间:	2012-09-11 19:14:44 (UTC+8)
出版者:	國立中央大學
摘要:	電子產業為各國重點發展之工業，而半導體產業為電子工業中的關鍵產業。舉凡國防、通訊、資訊、運輸、消費性電子等產業，其成長發展與半導體技術不斷日新月異息息相關。近年來，由於建廠及製程技術研發成本不斷高漲，許多傳統IDM廠商將持續把製造委外代工，朝向Fab-lite 及Fabless轉型；而台灣廠商所建立的晶圓代工模式更帶動了IC設計業蓬勃發展，Qualcomm 及Broadcom這兩家專業的IC設計公司在2011年也晉升前十大半導體公司。來自IDM廠商及IC設計公司的龐大產能需求使得晶圓代工廠的產能經常供不應求，因此適時提升產能，滿足客戶需求，成為晶圓廠的重要課題。半導體產業投資金額大，一座八吋廠的成本大約10億美元，其中製造設備的採購及安裝就佔了八成，金額超過新台幣兩百億，裝機到試產需時三個月以上；又半導體產業景氣變化劇烈，各大廠均面臨嚴峻的挑戰，對新廠及設備的購置均十分謹慎。因此，以現有機台增加產能，是半導體廠降低成本及提升競爭力的關鍵。本研究試圖找出設備效率不佳的因素，從中進行改善，進而增加產能及公司競爭力。本研究以A公司五廠高電流離子植入機(HCI)作為研究個案。A公司為專業晶圓代工公司，旗下之一的五廠常因高電流離子植入機產能不足而無法滿足客戶的強大產能需求。有鑑於此，成立工作小組以Ford 8D 手法進行分析。Ford 8D是解決問題的8條基本準則或稱8個工作步驟，針對出現的問題，找出問題產生的根本原因，提出短期，中期和長期對策並採取相應行動措施。本研究提供一個實際案例，可以瞭解應用8D法提升設備產能的過程，以供企業對於解決問題的參考。Electronics industry is very important in every country, and the semiconductor industry is the key point for the electronics industry. The rapid growth of semiconductor technology also changes defense, communication, information, transportation, and consumer electronics industry. In recent years, fab construction and process technology R & D costs rising, many of the traditional IDM(Integrated Device Manufacturer)companies will continue manufacturing outsourcing, head towards to be a Fab-lite and Fabless company. Foundry, this business model created by the Taiwanese manufacturer makes IC design industry growing. Two professional IC design companies: Qualcomm and Broadcom, are promoted to the top 10 semiconductor company in 2011. Huge capacity demand from IDM and IC design companies usually makes the production of foundry in short supply, therefore timely to improve productivity and meet customer demand is an important lesson for the foundry.Large amount of investment in the semiconductor industry is necessary. An eight-inch fab costs about $ 1 billion, 80% for manufacturing equipment (about NT $20 billion) and from equipment installation to trial production will take more than three months. Prosperity of semiconductor industry changes very quickly, every semiconductor company is facing severe challenges, it’s very cautious to construct a new fab or to purchase new manufacturing equipment. Therefore, to increase productivity of existing machines is more important to semiconductor fab to reduce costs and enhance competitiveness. This study attempts to identify the factors of poor equipment efficiency then improve it to increase productivity and competitiveness of semiconductor companies.High current ion implanter in A Company, fab 5, is the topic in this study. A company is a professional foundry, its fab5 was often unable to meet the customer's capacity requirements because the high current ion implanter was the production bottleneck. For this reason, we set up a team to analyze this problem in Ford-8D procedures. Ford-8D uses eight basic criteria to solve the problem. To solve problem, we first identify the root cause of problem, and propose short, medium and long-term plans and take appropriate action. This study provides a practical case to understand how to use 8D method to improve productivity and also be a reference to solve the problem.
显示于类别:	[高階主管企管（EMBA）碩士班] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	726	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....