中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/61365
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42748339      線上人數 : 1781
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/61365


    題名: 應用多項式滾動支承之隔震橋梁研究
    作者: 曾靖紘;Tzeng,Jing-Hung
    貢獻者: 土木工程學系
    關鍵詞: 滾動支承;變曲率隔震支承;變頻式隔震支承;近域震波;振動台實驗
    日期: 2013-08-23
    上傳時間: 2013-10-08 09:30:40 (UTC+8)
    出版者: 國立中央大學
    摘要: 傳統滑動隔震支承已被廣泛應用,且具有相當良好之隔震效果,但易與近斷層產生低頻共振現象,減低其隔震效能。前人研究具變頻特性之隔震支承可有效改善傳統隔震支承於近斷層地震之隔震效果,但仍有支承摩擦材選用不易的問題。本文採用多項式滾動隔震支承(Polynomial Rocking Bearing, PRB),PRB隔震支承之滾動曲面為六次多項式構成,具變頻特性,其遲滯迴圈有軟化段及硬化段之不同隔震效果,軟化段可降低結構物加速度反應,硬化段可抑制支承鉅大位移量,此外,改變PRB幾何性質亦可輕易調整其等效水平摩擦係數,因此摩擦材可任意選擇,增加支承之可靠度及耐用度。
    根據前人研究已證實PRB對建築結構具有良好之隔震效果,尚未有應用於橋梁之實例。本研究以實驗結果驗證PRB理論與數值分析之正確性,依據日本道路橋示方書建立一座橋梁模型,使用PSO-SA混和搜尋法求得PRB支承最佳設計參數,並比較傳統摩擦單擺支承(Friction Pendulum System, FPS)與PRB之隔震效益。
    Conventional sliding isolators are widely used and effective to reduce seismic hazard, but it may not be effective when the structures are subjected to near-field ground motions because the pulse periods ground motions are usually close to the isolation periods of the isolators, and it may lead isolated structures to resonate with the ground motions. Various frequency sliding isolators could improve the performance of seismic isolation under near-field ground motions, but chosen friction materials were a difficult issue. In this study is using Polynomial Rocking Bearing (PRB). The rocking surface of PRB consists of six-order polynomial. The restoring stiffness possesses two sections: softening section and hardening section. The structural acceleration response can be reduced by decreasing the restoring stiffness, while the structural displacement response can be reduced by increasing the restoring stiffness of PRB. PRB equivalent horizontal friction coefficient can be easily adjusted via the bearing geometry, so the friction material can be arbitrarily chosen, increasing the isolator reliability and durability.
    According to previous studies the PRB effective to reduce seismic hazard on building structure, but it is not yet used in the bridges. In this study, PRB experimental results verify the accuracy of theoretical and numerical analysis. Find out the optimal parameters of PRB by using PSO-SA hybrid algorithm, and compare the isolation effectiveness between PRB and Friction Pendulum System (FPS).
    顯示於類別:[土木工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML673檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明