增積楔幾何形貌、岩體材料強度與孔隙水壓空間變化;Geometry of Wedge Taper, Spatial Variation of Rock Mass Strength and Overpressure

NCU Institutional Repository > 地球科學學院 > 應用地質研究所 > 研究計畫 > Item 987654321/63296

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/63296

题名:	增積楔幾何形貌、岩體材料強度與孔隙水壓空間變化;Geometry of Wedge Taper, Spatial Variation of Rock Mass Strength and Overpressure
作者:	董家鈞
贡献者:	國立中央大學應用地質研究所
关键词:	地球科學;土木水利工程
日期:	2012-12-01
上传时间:	2014-03-17 14:26:27 (UTC+8)
出版者:	行政院國家科學委員會
摘要:	研究期間：10108~10207;Critical-taper wedge theory explains the first-order geometry of fold and thrust belts as a function of the internal strength of the wedge of deforming material and the strength of the basal detachment. This study incorporates the nonlinear Hoek and Brown failure criterion into the critical taper model to evaluate the variation of the taper angle of thrust belt with changes of wedge thickness. From collected wedge profile found wedge geometry about three types of morphology were fixed angle, convex upward and concave upward. The effects of the lateral pore pressure changes at the wedge and the detachment, and formation strength (GSI) change at the wedge, as well as effect of non-linear wedge strength contribute to the results. Non-linear Hoek-Brown failure criterion will be incorporated into the proposed model where the linear Mohr-Coulomb failure envelop seems oversimplified. Extensively field works (measure the geological strength index; GSI), laboratory tests (measure the uniaxial compressive strength) and numerical simulations (seepage analysis) will be conducted to build the non-linear model which the influence of earthquake and pore pressure is considered. Consequently, the strength of rock mass could be inferred from the wedge geometry. If the internal strength of the wedge could be obtained from field data, it is anticipated that the long term frictional coefficient of the detachment and overpressure distributed in the crust could be constrained. A low to high velocity rotary shear apparatus is utilized to measure the “drained” frictional coefficient. Together with the pore pressure measured in CPC oil well, this ideal could be validated.
關聯:	財團法人國家實驗研究院科技政策研究與資訊中心
显示于类别:	[應用地質研究所] 研究計畫

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	392	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....