中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/70300
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 42736118      在线人数 : 1385
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/70300


    题名: The Comparison Study of Various Surface Maintenance Alternatives in Taiwan Freeway
    作者: 李妍霏,;Ariyanti,Fita
    贡献者: 土木工程學系
    关键词: 高速公路;壽命週期成本分析(LCCA);IRI;Freeway;Life Cycle Cost Analysis;IRI
    日期: 2016-04-07
    上传时间: 2016-06-04 12:18:22 (UTC+8)
    出版者: 國立中央大學
    摘要: 高速公路是台灣的一個重要途徑,將繼續逐年增長。規範高速公路的管理應在維護和修復(M&R)被視為監視路面狀況。正確的M&R 是考慮成本和性能需求進行評估。壽命週期成本分析(LCCA)是一種經濟工具相比,路面M&R 項目,包括維護和修復項目的最佳替代選項。本研究通過利用廣西段為例高速公路3 號評估路面台灣高速公路基於全壽命成本的最佳厚度層這項研究創造了6 種替代和參數包括一個固定的摩擦層的厚度,三名康復厚度和2 康復週期。每一個替代指標是基於RealCost 軟件和國際平整度指數(IRI)值的基礎上的關係確定性分析的總成本。通過使用5 年,7 年,5 厘米,8 厘米和厚度層為10 厘米的康復週期給影響到它通過測量IRI 年M&R 的成本和路面狀況。直到16%至7年的康復週期與5 厘米厚度的作為比較基礎5 年10 厘米厚度層的康復週期是提高了IRI。然而,基於視年度M&R 成本點,這種替代是53%更昂貴相比的比較基數。對於M&R最低的機構和用戶的成本是7 年間重修週期與5 厘米的表面來實現,而EUAC(相當於統一年費)這個選擇是新台幣1.62 億,並得到了IRI 值是2,結果顯示更昂貴的年度M&R成本是指示更好的路面狀況的路面下IRI 性能。而作為本研究中提到的結論是用5 厘米的表面具有7 年生命週期分析是最佳可行的解決方案,值得台灣的高速公路被採用,尤其是在廣西科。;Freeway is an important pathway in Taiwan that will continue to increase every year.
    Management of regulating freeway should be considered in maintenance and rehabilitation (M&R) to monitor the pavement condition. Proper M&R that considers the cost and performance have to be assessed. Life Cycle Cost Analysis (LCCA) is an economic tool to compare the best
    alternative option for the pavement of M&R project, including the maintenance and rehabilitation projects. This study evaluates the optimum thickness layer for pavement in Taiwan Freeway based on LCCA by taking a case study of Guanxi Section in Freeway No. 3. This study
    created six types of alternative and the parameter include one fixed friction layer thickness, three
    rehabitation thickness and two rehabitation cycles. The indicators for each alternative are the total cost based on the deterministic analysis by RealCost software and International Roughness Index (IRI) value based on the relationship. By using 5 years and 7 years of rehabilitation cycle with 5 cm, 8 cm, and 10 cm of thickness layer gave the influenced of annual M&R cost and pavement condition which measured by IRI. 5 years of rehabilitation cycle with 10 cm of thickness layer was improved the IRI until 16% compared to 7 years of rehabilitation cycle with 5 cm of thickness as a comparative base. However, based on the annual M&R cost point of view, this alternative is 53% more expensive opposed to the comparative base. The lowest agency and
    user cost for M&R were achieved by 7 years of rehabilitation cycle, with 5 cm of the surface,
    and the EUAC (equivalent uniform annual cost) for this alternative, is NTD 162 million and got the IRI value is 2. The results show that more expensive the annual M&R cost, the lower IRI performance for the pavement that indicates better pavement condition. And as mentioned by
    this study conclude that by using 5 cm of the surface with 7 years of life cycle analysis is the best feasible solution and worthy to be adopted in Taiwan freeway, especially in Guanxi Section.
    显示于类别:[土木工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML351检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明