單光電偵測器之複合式光學讀寫頭; Single sensor of combo optical pick-up head

NCU Institutional Repository > 理學院 > 光電科學研究所碩士在職專班 > 博碩士論文 > Item 987654321/7175

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/7175

题名:	單光電偵測器之複合式光學讀寫頭;Single sensor of combo optical pick-up head
作者:	蔡宏昌;Hung-Chang Tsai
贡献者:	光電科學研究所碩士在職專班
关键词:	複合式光學讀寫頭;單光電偵測器;combo optical pick-up head;Single sensor
日期:	2008-10-17
上传时间:	2009-09-22 10:51:22 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	傳統的光學讀取頭需要多個物鏡和多個光電感測器和多條光軸才能將Blu-ray、DVD的讀取裝置結合，其成本容易偏高，結構也較為複雜，且在製程及校對光軸時較為費時費力，整個光路也較為龐大。本論文提出一個單光電偵測器之複合式光學讀寫頭的設計，在光學讀寫頭的去光路用了一些稜鏡組和鍍膜來達成分光的效果，在回光路加上了全像型光學元件(HOE)，使二種波長的光能夠同時共用同一個物鏡、準直鏡、波長選擇鏡，大幅的減少了成本，結構也簡單許多，製程容易，因為所需光學元件較少，整個光路設計也比傳統型縮小許多，對於日後複合式讀取頭的微型化相信會有明顯的幫助。 The traditional design of a combination of Blu-ray and DVD was needed to use a number of objective lens, photo-electricity sensors and optical axes for a combo optical pick-up head, the disadvantage of this design is that higher cost occurred, a complicated construction, a time-consuming process and optical axis checking, and the entire optical path is large. This research proposes a design of a combo-optical pick-up head with a single photo-electricity sensor, its uses prisms and coatings to divide the light on the forward path, and uses the holographic optical element (HOE) on the returning path. For this design, it presents that we can use an objective lens, a collimating lens and a wavelength selector for two different wavelength light sources of Blur-ray and DVD. Because it uses less elements of an optical pick-up head, it can help cost down, processes simplified, and easy to produce. With such a design, the whole optical path will be shorter than traditional ones, it will be significant help for a miniaturized combo-optical pick-up head in the future.
显示于类别:	[光電科學研究所碩士在職專班 ] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....