中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/74067
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42692832      線上人數 : 1646
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/74067


    題名: 小型電離層探測儀電源管理單元
    作者: 曾從恩;Tseng, Tsung-En
    貢獻者: 太空科學研究所
    關鍵詞: 小型電離探測儀;浮動電位裝置;電漿量測;CIP;Compact Ionosphere Probe;Floating Potential Device;plasma diagnostics;INSPIRESat-1
    日期: 2017-08-08
    上傳時間: 2017-10-27 13:07:15 (UTC+8)
    出版者: 國立中央大學
    摘要: INSPIRESat-1 衛星搭載的科學酬載為小型電離層探測儀 (Compact Ionosphere Probe, CIP) ,其主要目的為量測電離層電漿參數,如離子密度、離子組成、離子速度、離子溫度與電子溫度。由於CIP必須安置於3U立方衛星裡面中,其內部空間有限,必須盡可能縮小探測器體積至1U以內。CIP內部主要由三張電路板所疊構而成,而本論文內容主要著重於第三張電路板的開發與研製,稱之為電源管理單元 (Power Management Unit, PMU) 。主要目的為將衛星提供的電源進行轉換並分配至探測器內部三張電路板的電子元件與模組上。由於PMU為探測器的電源核心,內部勢必要有保護機制去避免突波電流或是SEL (Single Event Latch-up) 而危害探測器系統的元件。電路設計是採用 NI Multisim 電路設計軟體與 NI Ultiboard 的電路佈局軟體。參考各項元件的規格書,設計並研製CIP所需要的PMU電路功能。最後透過CIP內部三張電路板的整合並放置於電漿環境中量測電漿資料,驗證其設計與功能的正確性。
    ;CIP (Compact Ionosphere Probe) is the only one science payloads on the INSPIRESat-1. The purpose for CIP is measuring ionophere parameters. Including the ion concentrations、ion velocity、ion temperature and electron temperature. The CIP is seted up in the 3U cubesat. Due to the space limit, it have to minimum the sensor volume into 1U space. In the CIP interior, it is assembled by the three PCBs. The thesis is focus on the development and design of the third PCB. The third PCB is called Power Management Unit (PMU) . The main purpose of the PMU is to let CIP normally operation by convertering the satellite power and distributing the power to the every components in the CIP. PMU also be integrated into the CIP, too. The PMU controls the power system of the CIP. It must have the protection device to avoid the components damage because of inrush current or SEL (Single Event Latch-up) . The circuit design is using the NI Multisim software and the layout is using the NI Ultiboard software. Refering the specification of every components, end then designing the circuit that is correspond to function requirement of the PMU. Finally, combinating the three PCBs and deploying in the plasma enviroment measure the plasma to verify the design and function normally.
    顯示於類別:[太空科學研究所 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML311檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明