中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/81552
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 42728633      在线人数 : 1378
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/81552


    题名: 應用於微電網系統之抗干擾串聯式主動電力濾波器設計;Design of Robust Series Active Power Filter for Microgrid System
    作者: 李家璽;Li, Jia-Xi
    贡献者: 電機工程學系
    关键词: 動態電壓補償;電壓驟降;串聯式主動電力濾波器;電力品質;Dynamic Voltage Restorer;Voltage Sags;Series Active Power Filter;Power Quality
    日期: 2019-08-21
    上传时间: 2019-09-03 16:02:07 (UTC+8)
    出版者: 國立中央大學
    摘要: 在微電網中可能會因為能源不穩定或其它外在因素導致電源端電壓發生驟降或驟升甚至是更嚴重的電力品質問題,因此可以透過串聯式主動電力濾波器來改善這些問題,維持良好的電力品質,其主要目的是濾除干擾並準確補償電源端電壓,使後面負載端電壓可以跟干擾前保持一致,因此也稱為動態電壓補償器(Dynamic Voltage Restorer),硬體主要採三相四線轉換器架構,故要如何利用演算方法並透過硬體系統來實現串聯式主動電力濾波器補償器的效果為一大研究重點。
    透過本文實驗結果觀察到串聯式主動電力濾波器發生電壓驟降並含其它電力干擾狀況下具有即時性、準確性的補償,將負載端電壓保持在合理的範圍內,使得後面負載端電壓不受電源端干擾所影響。
    本文介紹了串聯式主動電力濾波器的運作原理及演算方法,並透過模擬及測試平台來驗證演算法的可行性後,更進一步實現於硬體系統。
    ;In the microgrid, Power supply voltage occur voltage sag or a swell due to energy instability or other external factors, or even a more serious power quality problem. Therefore, the serial active power filter can be used to improve these problems.Serial active power filter main purpose of filter out the interference and accurately compensate the voltage , so that the load voltage can be consistent with that before the interference. Therefore, it is also called the Dynamic Voltage Restorer.The main hardware is constructe in a three-phase four-wire converter, so how to use the calculation method and realize the effect of the series active power filter compensator through the hardware system is a major research focus.
    Through the experimental results of this paper, it is observed that when series active power filter occur voltage sag and other interference,has the compensation of immediacy and accuracy ,so that the load voltage is kept within a reasonable range, load not Power supply interference is affected.
    This paper introduces the operation principle and calculation method of the series active power filter, and then verifies the feasibility of the algorithm through the simulation and test platform,and further realizes the hardware system.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML253检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明