中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/83924
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42710610      線上人數 : 1542
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/83924


    題名: CANopen硬體加速器設計與硬體實作;Design and Implementation of CANopen Hardware Controller With Industrial Ethernet
    作者: 曾元佑;Tseng, Yuan-Yu
    貢獻者: 資訊工程學系在職專班
    關鍵詞: CANopen網路通訊協定;FPGA硬體實作;MIAT方法論;CANopen;FPGA design;Grafcet
    日期: 2020-07-10
    上傳時間: 2020-09-02 17:42:13 (UTC+8)
    出版者: 國立中央大學
    摘要: 工業 4.0 推動智慧製造的演進變革,透過工業互聯網路串連製造系統中的感測器、生產機台與可程式化控制設備,讓大量的生產數據得以即時收集並且傳遞到生產監控系統進行後續的分析與處理。但是工廠內的生產機台與控制設備有著各自不相容的通訊協定,這些無法彼此溝通的通訊協定往往造成資料交換的傳輸瓶頸與衍生網路設備難以有效管理的問題。因此本研究提出以硬體加速的方式,設計 CANopen 通訊協定的硬體加速器,利用乙太網路為資料傳輸介面,透過 UDP 封包傳輸 CANopen 訊息,解決不同設備之間資料交換的問題,也讓網路設備得以有效地管理。本研究利用 Intel Altera FPGA作為實驗平台,以 MIAT 硬體設計方法論設計與實作 CANopen slave 通訊協定,搭配影像串流傳輸的應用來驗證網路資料封包的高速傳輸效能。;Industry 4.0 promotes the evolution of smart manufacturing. Sensors, production equipment and programmable logic controllers in manufacturing systems connect through industrial internet and allow a large amount of production data can be collected in real-time
    and passed to the production monitoring system for subsequent analysis and processing.
    However, the production equipment in the factory have their own incompatible communication protocols. Different communication protocols that cannot communicate with
    each other often cause the transmission bottleneck` of data exchange and the problem that derivative the network equipment are difficult to manage effectively. Therefore, this study proposes to design the hardware accelerator of the CANopen communication protocol using Ethernet as the data transmission interface. The CANopen messages are transmitted through UDP packets, which solve the problem of data exchange between different devices and also allow network devices to be effectively managed. This study uses Intel Altera FPGA as the experimental platform and use the MIAT hardware design methodology to design and implement the CANopen slave controller. With the application of video streaming to verify the high-speed transmission performance of network data packets.
    顯示於類別:[資訊工程學系碩士在職專班 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML224檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明