中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/91916
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 42714644      在线人数 : 1376
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/91916


    题名: 具三苯胺衍生物之電洞傳輸層材料開發
    作者: 吳佩玲;WU, PEI-LING
    贡献者: 化學學系
    关键词: 三苯胺;電洞傳輸層;錫鈣鈦礦太陽能電池
    日期: 2023-06-28
    上传时间: 2024-09-19 14:42:34 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究主要以三苯胺 (Triarylamine, TAA) 為核心,開發出數種有機光電材料。首先於核心一端接上推電子基團為末端帶有甲氧基的三苯胺 (TPA) ;另一端接上拉電子基氰乙酸乙烯基 (Ethyl cyanoacetate) 和丙二腈 (Malononitrile) 作為錨定基團,再以加入噻吩來延長共軛系統及外掛不同數量的推電子基團,以調控材料能階及增加分子內電荷轉移,製備出六種小分子材料: TPA-MN (1) 、 TPA-CA (1a)、TPA-T-MN (2) 、 TPA-T-CA (2a)、3TPA-MN (3) 及 3TPA-CA (3a)。最後將這一系列材料應用在錫鈣鈦礦太陽能電池中的電洞傳輸層上,並以自組裝 (Self-assembly) 的方式製成元件,目前還在優化元件條件中,但其中 TPA-T-MN(2) 及 3TPA-MN (3) 效率已有達到 7%,與使用自組裝方法製造的錫鈣鈦礦太陽能電池的最高報導效率 8.3% 相比,已具有良好的初始測試結果,期望後續優化能有進一步地提升。;In this study, several organic photoelectronic materials were developed primarily based on triarylamine (TAA). One end of the core was functionalized with a methoxyl group as a terminal electron-donating group of triphenylamine (TPA). The other end was modified with electron-withdrawing groups, ethyl cyanoacetate and malononitrile, as anchoring groups. Additionally, thiophene units were incorporated to extend the conjugation length and various numbers of electron-pushing groups were attached to regulate the energy level of the materials and enhance intramolecular charge transfer effect. As a result, six small molecule materials were synthesized: TPA-MN (1), TPA-CA (1a), TPA-T-MN (2), TPA-T-CA (2a), 3TPA-MN (3), and 3TPA-CA (3a). Finally, this series were applied as hole transporting materials in Tin-based perovskite solar cells and fabricated into devices using a self-assembly process. Currently, the device conditions are still being optimized. However, TPA-T-MN (2) and 3TPA-MN (3) have both already achieved efficiencies of 7%. Compared to the highest reported efficiency of 8.3% for Tin-based perovskite solar cells fabricated using a self-assembly method, these materials have shown good performance in current test. These series are under optimizing. After improvement, their performances are expected for better efficiencies.
    显示于类别:[化學研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML21检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明