用於高速數據傳輸並具有抑制空間電洞燒炙表現的單模垂直共振腔面射型雷射之開發;The Suppression of Spatial Hole Burning Effect in Single-Mode VCSEL for High-Speed Data Transmission

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Electrical Engineering > Electronic Thesis & Dissertation > Item 987654321/95694

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/95694

Title:	用於高速數據傳輸並具有抑制空間電洞燒炙表現的單模垂直共振腔面射型雷射之開發;The Suppression of Spatial Hole Burning Effect in Single-Mode VCSEL for High-Speed Data Transmission
Authors:	林承緯;Lin, Cheng-Wei
Contributors:	電機工程學系
Keywords:	垂直共振腔面射型雷射;空間電洞燒炙表現;單模;高速數據傳輸;VCSEL;Spatial Hole Burning Effect;Single-Mode;High-Speed Data Transmission
Date:	2024-07-24
Issue Date:	2024-10-09 17:09:41 (UTC+8)
Publisher:	國立中央大學
Abstract:	隨著人工智慧(AI)和物聯網(IoT)產業的迅速發展，高速光連結系統所負荷的資料量大幅增加，共同封裝光學元件(Co-Packaged Optics, CPO)已成為光連結系統中的關鍵技術，因此需要藉由提高CPO系統的封裝密度，進而提升資料傳輸密度。將單模高速垂直共振腔面射型雷射(VCSEL)和單模光纖結合，相較於和多模光纖結合，能夠提供更高的資料傳輸密度。因此具有高單模輸出功率和強大的抗反射能力的VCSEL，在提高CPO的封裝密度中起著至關重要的作用。在本論文中，我們設計新穎的鋅擴散結構，能有效抑制空間電洞燒炙(Spatial Hole Burning)效應帶來的影響，將傳統單模VCSEL常見的低頻roll off及抗光反射能力較差的問題最小化。通過改變鋅擴散結構的孔徑，我們實現6.7 mW的高單模輸出功率、27GHz的寬3-dB頻率響應以及-137dB/Hz的低相對強度噪音值(Relative Intensity Noise, RIN)。在使用傳統多模光纖條件下進行眼圖量測，back-to-back (BTB)的Data rate可以達到56 Gbps， 500公尺傳輸的Data rate可以達到46Gbps。另外在反射光為-6dB的情況下，Data rate可以達到52Gbps。我們將850nm單模VCSEL與單模光纖結合，進行長距離傳輸量測。在經過一公里單模光纖傳輸後，系統(VCSEL+光纖)的頻寬從26GHz增加到31GHz。這是首次藉由850nm波段的光纖，看到高達 5GHz明顯的頻寬提升。此外，眼圖量測在back-to-back(BTB)的條件下，Data rate可以得到56 Gbps，並且在200公尺傳輸後的Data rate同樣可以得到56Gbps，眼圖的品質相比BTB幾乎無劣化。 ;With the rapid development of the artificial intelligence (AI) and Internet of Things (IoT) industries, the data load on high-speed optical interconnect systems has significantly increased. Co-Packaged Optics (CPO) has become a key technology in optical interconnect systems. Therefore, it is necessary to enhance the packaging density of CPO systems to further increase data transmission density. Combining single-mode high-speed Vertical-Cavity Surface-Emitting Lasers (VCSELs) with single-mode fibers, as opposed to multi-mode fibers, can provide higher data transmission density. Therefore, VCSELs with high single-mode output power and strong anti-reflection capabilities play a crucial role in increasing the packaging density of CPO. In this thesis, we designed a novel zinc diffusion structure that effectively suppresses the impact of Spatial Hole Burning (SHB) and minimizes the common issues of low-frequency roll-off and poor anti-reflection capability in traditional single-mode VCSELs. By altering the aperture structure of zinc diffusion, we achieved a high single-mode output power of 6.7 mW, a wide 3-dB frequency response of 27 GHz, and a low Relative Intensity Noise (RIN) value of -137 dB/Hz. Eye diagram measurements under traditional multi-mode lens fiber conditions showed that the back-to-back (BTB) data rate reached 56 Gbps, the data rate for 500 meters of transmission was 46 Gbps, and with -6 dB reflected light, the data rate achieved was 52 Gbps. We combined the 850nm single-mode VCSEL with single-mode fiber for long-distance transmission measurements. After one kilometer of single-mode fiber transmission, the system (VCSEL + fiber) bandwidth increased from 26GHz to 31GHz. This is the first time a significant 5GHz bandwidth enhancement has been observed using fiber at the 850nm wavelength. Additionally, eye diagram measurements under back-to-back (BTB) conditions showed a data rate of 56 Gbps, and the same data rate was maintained after 200 meters of transmission, with the eye diagram quality showing almost no degradation compared to BTB conditions.
Appears in Collections:	[Graduate Institute of Electrical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	26	View/Open

社群 sharing

Loading...