MULTIPLE COATING OF TITANIUM-BORON OXIDE SOL-GEL ON GLASS

NCU Institutional Repository > 工學院 > 化學工程與材料工程研究所 > 期刊論文 > Item 987654321/26732

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26732

题名:	MULTIPLE COATING OF TITANIUM-BORON OXIDE SOL-GEL ON GLASS
作者:	HSIEH,CW;CHIANG,AST;LEE,CC;TU,SL
贡献者:	化學工程與材料工程學系
关键词:	N/A
日期:	1992
上传时间:	2010-06-29 17:35:26 (UTC+8)
出版者:	中央大學
摘要:	TiO2 - B2O3 composite thin films have been coated on microscope slides by a multiple dip-coating technique. Films produced with heating steps between the deposition of successive layers exhibit a better optical quality than those without. The former have a smaller grain size, less than 30nm as measured by SEM, and therefore result in less transmittance loss at the short wavelength region. X-ray diffraction studies show that these films are amorphous even after 500-degrees-C calcination, while films produced without intermediate heating become slightly crystallized after the same treatment. The thickness of the coated film is proportional to the number of layers applied. A film about 200nm in thickness can be produced by just four coatings. The refractive index of the film is 2.23 as evaluated from the transmission spectrum.
關聯:	MATERIALS RESEARCH BULLETIN
显示于类别:	[化學工程與材料工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	505	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing