資料載入中.....
|
請使用永久網址來引用或連結此文件:
http://ir.lib.ncu.edu.tw/handle/987654321/50697
|
| 題名: | Efficient Gel-Type Electrolyte with Bismaleimide via In Situ Low Temperature Polymerization in Dye-Sensitized Solar Cells |
| 作者: | Chen,JG;Liu,KY;Chen,CY;Lin,CY;Huang,KC;Lai,YH;Wu,CG;Lin,KF;Ho,KC |
| 貢獻者: | 化學學系 |
| 關鍵詞: | PLASTIC-CRYSTAL ELECTROLYTE;CROSS-LINKED GEL;COMPOSITE ELECTROLYTE;LIQUID ELECTROLYTES;PERFORMANCE;ENHANCEMENT;PRECURSORS;CONVERSION;MECHANISM;SYSTEMS |
| 日期: | 2010 |
| 上傳時間: | 2012-03-27 18:08:09 (UTC+8) |
| 出版者: | 國立中央大學 |
| 摘要: | This study reports the characteristics of gel-type dye-sensitized solar cells (DSSCs), fabricated with gel-type electrolyte containing poly-1,1'-(methylenedi-4,1-phenylene) bismaleimide (PBMI), or poly-1,1'-(3,3'-dimethyl- 1,10-biphenyl-4,4'-diyl) bismaleimide (PDBBMI), or poly-N,N'-(4-methyl-1,3-phenylene)bismaleimide (PMPBMI), prepared by in situ polymerization of the corresponding monomer without an initiator at 30 degrees C. Incorporating 0.3 wt % content of exfoliated alkyl-modified nanomica (EAMNM) into PBMI-gelled electrolyte leads to higher short-circuit current density (J(sc) = 17.14 mA cm(-2)) and efficiency (eta = 7.02%) than that of neat PBMI-gel electrolyte (J(sc) = 15.32 mA cm(-2), eta = 6.41%). Incorporating 0.3 wt % EAMNM into PBMI-gelled electrolyte results in remarkably stable device performance under continuous light soaking under one sun (100 mW cm(-2)) at 55 degrees C. The efficiency of DSSCs based on PBMI/0.3 wt % EAMNM-gelled electrolyte drops by only 1.7% (eta = 6.93%) after 500 h of continuous light soaking. (C) 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4950-4957, 2010 |
| 關聯: | JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY |
| 顯示於類別: | [化學學系] 期刊論文
|
文件中的檔案:
| 檔案 |
描述 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | | 0Kb | HTML | 493 | 檢視/開啟 |
|
在NCUIR中所有的資料項目都受到原著作權保護.
|
