English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 94459/94459 (100%)
造访人次 : 87643873      在线人数 : 853
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻

    邻近社群


    地球科學學院 [8607/8607]
    客家學院 [1673/1673]
    文學院 [4257/4257]
    永續與綠能科技研究學院 [6/6]
    理學院 [17631/17631]
    生醫理工學院 [3576/3576]
    研究中心 [2682/2682]
    管理學院 [17191/17191]
    總教學中心委員會 [115/115]
    行政單位 [786/786]
    資訊電機學院 [15705/15705]

    社群统计


    近3年内发表的文件: 1414(6.37%)
    含全文笔数: 22185(100.00%)

    文件下载次数统计
    下载大于0次: 22185(100.00%)
    下载大于100次: 20316(91.58%)
    全文下载总次数: 13632412(23.49%)

    最后更新时间: 2026-09-13 06:37

    上传排行

    数据加载中.....

    下载排行

    数据加载中.....

    RSS Feed RSS Feed
    跳至:
    或输入年份:
    由新到旧排序 由最旧的开始

    显示项目301-350 / 22185. (共444页)
    << < 26 27 28 29 30 31 32 33 34 35 > >>
    每页显示[10|25|50]项目

    日期题名作者
    2025-08-12 都會區商務快遞排程最佳化之研究 邱予暄; Chiu, Yu-Hsuan
    2025-08-12 化學氣相沉積法合成可控陣列二硫化鉬及元件特性之研究;Study on the Synthesis of Controllable Molybdenum Disulfide Arrays by Chemical Vapor Deposition and Device Characterization 蕭皓謙; HSIAO, HAO-CHIEN
    2025-08-12 交流馬達的新型磁場導向控制;The innovative methods of eld-oriented control used for AC motor 丁崇武; Ding, Chung-Wuu
    2025-08-11 構架含顆粒阻尼器之振動台實驗 何冠瑩; HE, GUAN-YING
    2025-08-11 六軸平台精度提升於藍寶石啞鈴形鑽孔之研究;A study on the Precision Enhancement of a Six-Axis Stage for Dumbbell-Shaped Drilling in Sapphire 李信毅; Li, Xin-Yi
    2025-08-09 電磁式慣質調諧質量阻尼器應用於鐵路橋梁減振效能分析;Vibration suppression performance of Electromagnetic Inerter-based Tuned Mass Damper for railway bridges 施妤臻; Shi, Yu-Zhen
    2025-08-09 雙向天鉤主動隔震系統之研發與效能評估-以AC156試驗準則驗證 羅元廷; Luo, Yuan-Ting
    2025-08-09 鎵與退火處理對Al-Ga-Mg-Sn合金鋁空氣電池陽極電化學性能的影響;Effects of gallium and annealing treatments on the electrochemical properties of Al-Ga-Mg-Sn alloy anode for aluminum-air batteries 黃千瀚; Huang, Qian-Han
    2025-08-06 Si對Al-64vol%SiC複合材料機械與熱性質之影響;Effect of Si on the mechanical and thermal properties of Al-64vol%SiC composite 高廷鈞; Kao, Ting-Jun
    2025-08-06 陶粒尺寸與熱處理對鋁基多孔複合材料壓縮性質之影響;Effect of ceramic size and heat treatment on the compressive properties of aluminum matrix syntactic foams 王藝瑾; Wang, Yi-Jin
    2025-08-06 微量鈣對Mg-4.6Sn-2.4Zn-0.07Na合金骨科植入物性質之影響;Effects of minor calcium on the properties of Mg-4.6Sn-2.4Zn-0.07Na alloys orthopedics implants 王宸諒; Wang, Chen-Liang
    2025-08-05 使用具8K解析度樹脂3D列印機製作符合JIS精度規範之正齒輪;Study on the Fabrication of JIS Spur Gears by Using a Resin 3D Printer With 8K-Resolution 陳彥勳; CHEN, YAN-XUN
    2025-08-05 電容反向電透析(CRED)參數探討及產電效能可行性評估;Development and Power Generation Performance Evaluation of Capacitive Reverse Electrodialysis (CRED) 林啟振; Lin, Chi-Chen
    2025-08-05 利用機器學習結合蟻群演算法最佳化聚醯胺六之碳纖維複合材料射出成型縫合線強度;Optimization of weld line strength for injection molding process parameters of polyamide 6 and carbon fiber composites using machine learning and ant colony algorithm 傅家芸; Fu, Chia-Yun
    2025-08-04 二噻吩并吡咯鑲嵌於 S,N-駢七芳香雜環之新穎合成途徑開發與應用;Development of New Synthetic Approaches and Applications for Dithienopyrrole (DTP)-Embedded S,N-Heteroheptacene 黃家欣; Huang, Jia-Xin
    2025-08-04 新型S,N-駢七芳香雜環化合物之高效率合成與其在反式鈣鈦礦太陽能電池應用之研究;Study on Efficient Synthesis of New S,N-Heteroheptacene for Applications in Inverted Perovskite Solar Cells 蔡宗晉; Cai, Zong-Jin
    2025-08-04 相變材料之建築能耗模擬及分析;Simulation and Analysis of Building Energy Performance Incorporating Phase Change Materials 張皓崴; Chang, Hao-Wei
    2025-08-01 Natural Language-Driven Robot Control: Integrating Large Language Model with ROS2 and Omniverse Isaac Sim for Intuitive Human-Robot Interaction 沙其邁; Ahmed, Shakeel
    2025-08-01 SiC/Al複合材料對導熱與機械性質最佳化製程之研究;Study on the Optimization Process of Thermal Conductivity and Mechanical Properties of SiC/Al Composite Materials 謝偉俊; Hsieh, Wei-Chun
    2025-08-01 基於單視角視覺與深度學習之羽球員姿態分析系統;Badminton Player Posture Analysis System Based on Monocular Vision and Deep Learning 劉昕倫; Liu, Hsin-Lun
    2025-08-01 親水液滴擴展之流場顯影研究:甘油濃度與基板溫度的影響;Flow field visualization for hydrophilic droplets spread: Effects of glycerol concentration and substrate temperature 林維濂; LIN, WEI-LIEN
    2025-07-31 基於EMD的廣義多層次立方雲小波轉換及其在穿戴式嵌入系統進行EXG訊號處理實現;Emd-Based Generalized Multilevel Cubic Spline Wavelet Transform and Its Realization in Wearable Embedded System for Exg Signal Processing 王淵弘; 梁勝富
    2025-07-31 協作式開顱使用可重構機構;Design of a Highly Reconfigurable Mechanism for Collaborative Craniotomy 伊泰龍; 林立岡; 吳杰才
    2025-07-31 SAC305錫膏之超平坦塗佈暨精密可擇性雷射誘導正向印刷技術開發;Development of Ultra-Flat Coating of Sac305 Solder Paste and Precision Selective Laser-Induced Forward Printing Technology 何正榮
    2025-07-31 吉赫脈衝串模式飛秒雷射(GHz-burst-mode fs-laser)應用於帶隙材料(Band-gap materials)之表面圖紋、微鑽孔與金屬化特性及應用研究( I );Study on the Characteristics and Applications of Surface Patterning, Micro-Drilling, and Metallization of Band-Gap Materials Using Femtosecond Laser in Gigahertz Burst Mode( I ) 何正榮
    2025-07-31 生成式AI驅動智能製造之實現以玻璃核心基板雷射製程與非破壞檢測為例( I );Implementation of Generative Ai-Driven Intelligent Manufacturing: a Case Study on Laser Fabrication and Non-Destructive Inspection of Glass-Core Substrates( I ) 何正榮; 林志光; 李朱育; 董必正; 孫敏德
    2025-07-31 矽晶深冷陽極氧化的研究與應用:矽量子點的製作;Research and Applications of Cryogenic Anodization on Silicon: Fabrication of Silicon Quantum Dots 李天錫
    2025-07-31 鑽石薄膜基板之自由基拋光技術研究;Study on Free-Radical Polishing Technology for Diamond Layer on Substrate 李天錫
    2025-07-31 雙波長偏振干涉儀之研發與精密量測之應用;Development and Precision Measurement Applications of Dual-Wavelength Polarization Interferometer 李朱育
    2025-07-31 基於觀測器設計的狀態相關黎卡迪方程式最佳化控制器於電動車馬達驅動系統:理論基礎與硬體驗證(使用微控器和現場可程式化邏輯閘陣列);Observer-Based State-Dependent Riccati Equation Optimal Controller for Motor Drive System in Electric Vehicles: Theory and Hardware Experiments (Microcontroller and Fpga) 林立岡; 吳金典
    2025-07-31 航空用鋁合金板材淬火殘留應力與機械消除之有限元素及人工智慧預測模型研究;Integrating Finite Element Method and Artificial Intelligence for Predictive Modeling of Residual Stress and Mechanical Relief in Aerospace Aluminum Alloy Plates after Quenching 林志光
    2025-07-31 智慧型輪椅輔助動力系統(II);Intelligent Wheelchair Auxiliary Power System (II) 林苑婷
    2025-07-31 揭開WiFi的隱形視界--數位孿生WiFi訊號的成像分析與應用;Unveiling the Invisible Horizon of Wifi: Digital Twin-Based Signal Imaging and Applications 林智揚
    2025-07-31 利用流場、結構模態整合阻尼比反向監測技術於流固耦合降階模型開發及應用;Development and Application of a Reduced-Order Fluid-Structure Interaction Model Integrating Flow Fields, Structural Modes, and Damping Ratio-Based Inverse Monitoring Techniques. 邱德耀
    2025-07-31 前瞻安全氫/氨燃燒科技實驗研究( I );An Experimental Investigation of Advanced Safe Hydrogen/Ammonia Combustion Science and Technology( I ) 施聖洋
    2025-07-31 鍋爐混氫燃燒系統使用人工智慧回饋控制開發( I );Development of a Boiler Hydrogen Co-Firing Combustion System Integrated with Ai-Based Feedback Control Technology( I ) 施聖洋; 伍芳嫺; 周咏蒨; 陳冠邦; 董必正; 楊授印; 詹彥信
    2025-07-31 磁力與氣泡輔助電化學放電加工法於鎳基超合金高深徑比及陣列異形孔加工之研究;Research on Magnetic and Bubble-Assisted Electrochemical Discharge Machining Methods for Processing High Aspect Ratio and Array Special-Shaped Holes in Nickel-Based Superalloys 洪榮洲
    2025-07-31 超音波振動輔助線切割放電加工鋁碳化矽基板之研究;Study on Ultrasonic Vi Bration-Assisted Wire Electrical Discharge Machining of Aluminum Silicon Carbide Substrates 崔海平
    2025-07-31 基於微流體與人工智慧整合技術之循環腫瘤細胞捕捉與檢測平台開發;Development of an Integrated Microfluidic and Ai System for Capturing and Detecting Circulating Tumor Cells 曹嘉文
    2025-07-31 CMOS-MEMS慣性感測器之設計與開發;Design and Development of a Cmos-Mems Inertial Sensor 陳世叡
    2025-07-31 歪斜軸傳動之圓柱型蝸桿、雙包絡蝸桿及錐蝸桿之動力刮削製造與刀具設計 II;Manufacturing and Cutter Design of Cylindrical, Double-Enveloping, and Spiroid Worms Used in Skew-Axis Transmission by Power Skiving 陳怡呈
    2025-07-31 手眼力觸感測融合與虛實整合之AI驅動下世代自主機器人實現( I );Ai-Driven Next Generation Autonomous Robot Realization with Hand-Eye-Touch Sensor Fusion and Vi Rtual Reality Integration( I ) 陳怡呈; 林錦德; 林智揚; 張嘉惠
    2025-07-31 基於大型動作模型的移動式機器手臂控制:辦公室內物品傳遞與撿拾應用;Implementation of Mobile Manipulator Based on Large Action Model: Object Picking, Delivery, and Handover Applications in Office 陳翔傑
    2025-07-31 機器學習分析RF氮化鋁薄膜製程中的Arcing異常及史密斯圓應用優化;Machine Learning Analysis of Arcing Anomalies in Rf Aluminum Nitride Thin Film Processing and Optimization of Smith Chart Applications 傅尹坤
    2025-07-31 應用藻生聚磷酸於無細胞仿生二氧化碳固定( IV );Harnessing Algal Polyphosphate for Biosynthetic Co2 Fixation in Membraneless Protocells( Iv ) 王柏翔
    2025-07-31 Ga元素與退火處理對Al-Zn-Sn陽極合金電化學效能的影響;Effect of Ga Element and Annealing Treatment on Electrochemical Performance of Al-Zn-Sn Anode Alloy 曾有志
    2025-07-31 原位生成TiC增強粒子/7005鋁基複合材料之力學性質與熱加工製程探討;Investigation on the Mechanical Properties and Thermomechanical Processing of In-Situ Synthesized Tic Reinforced Particle/7005 Aluminum Matrix Composites 曾有志
    2025-07-31 塑膠及鋁箔包廢棄物升級循環製備為高價值之化學品、氫燃料及儲能電容器 之評估研究;Upcycling Innovation of Plastic and Tetra Pak Waste to Produce High-Value Chemicals, Hydrogen Fuel, and Energy Storage Supercapacitors 江康鈺
    2025-07-31 應用AI技術於玻璃通孔製程優化與EdgeAI之實現;Application of Ai Technology to Optimize Through-Glass Vi a (Tgv) Fabrication Process and Realization of Edge Ai 董必正
    2025-07-31 鹽差能再生能源:電容反向電透析(CRED)技術開發及操作參數優化提升發電效率;Salinity Gradient Renewable Energy: Development of Capacitive Reverse Electrodialysis (Cred) Technology and Optimization of Operational Parameters to Enhance Power Generation Efficiency 林伯勳

    显示项目301-350 / 22185. (共444页)
    << < 26 27 28 29 30 31 32 33 34 35 > >>
    每页显示[10|25|50]项目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明