 |
English
|
正體中文
|
简体中文
|
全文筆數/總筆數 : 94459/94459 (100%)
造訪人次 : 87661231
線上人數 : 175
|
|
|
"Lee, Shyong"的相關文件
回到依作者瀏覽
顯示 34 項.
|
類別 |
日期 |
題名 |
作者 |
檔案 |
| [機械工程學系] 期刊論文 |
2016-10-01 |
Size effect in gas forming a hot-bent AA5xxx V-shaped trough trimmed for an airplane strakelet skin panel |
李雄; Lee, Shyong; Tang, Jung-Sung; Chu, Chun-Lin |
 |
| [機械工程學系] 期刊論文 |
2016-02-01 |
The combination of rolling-and-T6-treatments with Al2O3-reinforcingparticles effect on A6061 metal-matrix composites |
李雄; Leu, Jyh-Shyan; Chu, Chun-Lin; Fuh, Yiin-Kuen; Huang, E-Wen; Lin, Kin-Fu; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2016-02-01 |
The combination of rolling-and-T6-treatments with Al2O3-reinforcingparticles effect on A6061 metal-matrix composites |
傅尹坤; Leu, Jyh-Shyan; Chu, Chun-Lin; Fuh, Yiin-Kuen; Huang, E-Wen; Lin, Kin-Fu; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2016-01-01 |
Prior sheet buckling leading to wrinkling formation in a gas forming a V-trough with wavy bottom |
李雄; Lee, Shyong; Tang, Jung Sung; Chu, Chun Lin |
|
| [機械工程學系] 期刊論文 |
2015-11-17 |
Explosion characteristics tests for micrometer-sized Ag dust cloud with a concentration of 0.8 g/L |
李雄; Liao, Chih Yeh; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2015-10-02 |
Flow stress behaviour of ABS (acrylonitrile–butadiene–styrene) at elevated temperature and application to the thermal vacuum forming process |
李雄; Fuh, Yiin-Kuen; Lee, Shyong; Chu, Chun-Lin |
|
| [機械工程學系] 期刊論文 |
2015-10-02 |
Flow stress behaviour of ABS (acrylonitrile–butadiene–styrene) at elevated temperature and application to the thermal vacuum forming process |
傅尹坤; Fuh, Yiin-Kuen; Lee, Shyong; Chu, Chun-Lin |
|
| [機械工程學系] 期刊論文 |
2015-07-09 |
Dynamic behavior of a 6069 Al alloy under hot compression |
李雄; Zhu, Feng-jun; Wu, Horng-yu; Lee, Shyong; Lin, Ming-chieh; Chen, Delphic |
|
| [機械工程學系] 期刊論文 |
2015-05-01 |
Hot Workability Analysis and Development of a Processing Map for Homogenized 6069 Al Alloy Cast Ingot |
李雄; Zhu, Feng-jun; Wu, Horng-yu; Lin, Ming-chieh; Lee, Shyong; Wang, Woei-ren |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Effect of potassium substituted for A-site of SrCe0.95Y0.05O3 on microstructure, conductivity and chemical stability |
李雄; Liu, Chi; Huang, Jian-Jia; Fu, Yen-Pei; Li, Chuan; Wang, Jian-Yih; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Flexible four-in-one micro sensor for reliability and 100-hour durability testing |
李雄; Lee, Chi-Yuan; Chen, Chia-Hung; Hsieh, Chin-Lung; Lin, Kin-Fu; Lee, Shyong; Chen, Ten-Lom; Huang, Yen-Pu |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Flexible two-in-one micro sensor for integration in vanadium redox flow battery |
李雄; Hsieh, Chin-Lung; Lee, Chi-Yuan; Chen, Chia-Hung; Lin, Kin-Fu; Lee, Shyong; Huang, Yen-Pu; Liu, Yun-Min |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Improving bond strength at propellant-liner interfaces |
李雄; Liao, Chih Yeh; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
In-situ monitoring of internal temperature, flow rate and pressure in the high-temperature proton exchange membrane fuel cell stack using flexible integrated micro sensor |
李雄; Chen, Chia-Hung; Lee, Chi-Yuan; Weng, Fang-Bor; Lee, Shyong; Huang, Yen-Ting; Cheng, Yen-Ting; Cheng, Chih-Kai |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Interfacial characterization of nickel-yttria-stabilized zirconia cermet anode/interconnect joints with Ag-Pd-Ga active filler for use in solid-oxide fuel cells |
李雄; Chao, Chih-Long; Chu, Chun-Lin; Fuh, Yiin-Kuen; Hsu, Ray-Quen; Lee, Shyong; Cheng, Yung-Neng |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Interfacial characterization of nickel-yttria-stabilized zirconia cermet anode/interconnect joints with Ag-Pd-Ga active filler for use in solid-oxide fuel cells |
傅尹坤; Chao, Chih-Long; Chu, Chun-Lin; Fuh, Yiin-Kuen; Hsu, Ray-Quen; Lee, Shyong; Cheng, Yung-Neng |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Superplastic forming process applied to aero-industrial strakelet: wrinkling, thickness, and microstructure analysis |
李雄; Tang, Jung-Sung; Fuh, Yiin-Kuen; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Superplastic forming process applied to aero-industrial strakelet: wrinkling, thickness, and microstructure analysis |
傅尹坤; Tang, Jung-Sung; Fuh, Yiin-Kuen; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2014-03-01 |
Characterization of Fe-Cr alloy metallic interconnects coated with LSMO using the aerosol deposition process |
李雄; Huang, Jian-Jia; Fu, Yen-Pei; Wang, Jian-Yih; Cheng, Yung-Neng; Lee, Shyong; Hsu, Jin-Cherng |
|
| [機械工程學系] 期刊論文 |
2014-01-01 |
Flexible micro sensors for in-situ diagnosis of proton exchange membrane fuel cell |
李雄; Chen, Chia-Hung; Lee, Chi-Yuan; Lee, Shyong; Liu, Yun-Min |
|
| [機械工程學系] 期刊論文 |
2014-01-01 |
Hot deformation behavior and flow stress modeling of annealed AZ61 Mg alloys |
李雄; Liao, Chinghao; Wu, Horngyu; Wu, Chengtao; Zhu, Fengjun; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2013-12-01 |
Design and analysis of a shock generator |
李雄; Liao, Chih Yeh; Lee, Shyong; Wung, Tzong Shyan; Chiu, Min Han |
|
| [機械工程學系] 期刊論文 |
2013-09-03 |
Experimental assessments on the resistance to oxidation and Cr evaporation of several Fe-Cr based alloys |
李雄; Huang, Jian-Jia; Li, Chuan; Lee, Shyong; Li, Ying-Sheng |
|
| [機械工程學系] 期刊論文 |
2013-08-01 |
Two-stage superplastic forming of a V-shaped aluminum sheet into a trough with deep and irregular contour |
李雄; Lan, Hsien-Chin; Fuh, Yiin-Kuen; Lee, Shyong; Chu, Chun-Lin; Chang, Tien-Chan |
|
| [機械工程學系] 期刊論文 |
2013-08-01 |
Two-stage superplastic forming of a V-shaped aluminum sheet into a trough with deep and irregular contour |
傅尹坤; Lan, Hsien-Chin; Fuh, Yiin-Kuen; Lee, Shyong; Chu, Chun-Lin; Chang, Tien-Chan |
|
| [機械工程學系] 期刊論文 |
2013-07-22 |
Evaluation of protective La0.67Sr0.33MnO 3-δ coatings on various stainless steels used for solid oxide fuel cell interconnects |
李雄; Huang, Jian-Jia; Chu, Chun-Lin; Yang, Peng; Chang, Tien-Chan; Lee, Shyong; Yang, Jung-Yen |
|
| [機械工程學系] 期刊論文 |
2013-03-10 |
Strain-dependent constitutive analysis of extruded AZ61 Mg alloy under hot compression |
李雄; Liao, Ching-hao; Wu, Horng-yu; Lee, Shyong; Zhu, Feng-jun; Liu, Hsu-cheng; Wu, Cheng-tao |
|
| [機械工程學系] 期刊論文 |
2012-12-01 |
Characterizing aberration of a pressure-actuated tunable biconvex microlens with a simple spherically-corrected design |
李雄; Fuh, Yiin-Kuen; Lin, Ming-Xin; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2012-12-01 |
Characterizing aberration of a pressure-actuated tunable biconvex microlens with a simple spherically-corrected design |
傅尹坤; Fuh, Yiin-Kuen; Lin, Ming-Xin; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2012-11-01 |
Gas forming a V-shape aluminum sheet into a trough of saddle-contour |
李雄; Lee, Shyong; Lan, Hsien-Chin; Lee, Jye; Wang, Jian-Yih; Huang, J. C.; Chu, Chun Lin |
|
| [機械工程學系] 期刊論文 |
2012-08-13 |
An oscillation-free actuation of fluidic lens for optical beam control |
李雄; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2012-08-13 |
An oscillation-free actuation of fluidic lens for optical beam control |
傅尹坤; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2012-08-01 |
Refinement of the primary Si particles in hypereutectic aluminum alloy |
李雄; Hsu, Chang-Chuan; Wang, Jian-Yih; Huang, Jian-Jia; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2012-02-01 |
Enhancement of Ti-containing hydrogenated carbon (TiC:H) films by high-power plasma-sputtering |
李雄; Gwo, Jyh; Chu, Chun-Lin; Tsai, Ming-Jui; Lee, Shyong |
|
|
::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期：8-24-2009 :::
